|
|
|
date: Wed, 25 Jun 2008 06:32:03 -0700,
group: microsoft.public.windows.vista.print_fax_scan
back
Re: Printer Sharing in Vista
Alan,
You seem to be an expert. I hope you will be able to help me. I have been
using my Epson R300 printer for over 12 months with Vista Home Premium. It
worked fine until recently when it stopped working and I got a message saying
Windows does not recognise a usb device. a device has malfunctioned. I
tried deleting the printer using control panel and reinstalling by plugging
into a usb slot. I got the same message.
I contacted Epson on line support and was guided through various procedures
without success. The technician thought it was a Vista problem rather than
the printer.
As the printer is still under an extended warranty, I took it to a local
Epson Repair Centre. The technician tested it and said he could find nothing
wrong but he reinstalled the firmware and reset the counter.
I tried again when I got home and reinstalled the printer using the "add
printer" feature in control panel and i actually managed to print a test page
and then a small word document. However, the next time I tried, it wouldn't
print anything and I got the same message - usb device not recognised.
Any ideas?
"Alan Morris [MSFT]" wrote:
> The XP Epson driver may not work on Vista.
>
> You can either install the Vista driver onto the XP machine (you have to
> perform this from the Vista machine targeting the XP machine) or install the
> printer on Vista as a local printer, creating a Local Port in the form
> \\XPmachine\printersharename and use the R300 driver that ships with Vista.
>
>
> --
> Alan Morris
> Windows Printing Team
> Search the Microsoft Knowledge Base here:
> http://support.microsoft.com/search/?adv=1
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "LaurenceCook" wrote in message
> news:439276FD-3856-4276-988B-4E687536361B@microsoft.com...
> >I have an Epson Photo R300 printer connected to a desktop running WinXP and
> > shared on the home network. I have a Vista Home Premium laptop on the home
> > network and want to use the shared printer. I have gone through the add
> > printer wizard, selected the Epson printer from the list of printers on
> > the
> > network, and clicked to install the driver. At this point the wizard stops
> > responding, and the printer is not added to the Vista laptop.
> >
> > Any suggestions?
>
>
>
date: Fri, 7 Nov 2008 04:59:00 -0800
author: Barryjt
Re: Printer Sharing in Vista
Alan,
Further to previous post, I have tried using "System Restore" to restore my
pc back to when the printer was working ok but that didn't help.
"Barryjt" wrote:
> Alan,
>
> You seem to be an expert. I hope you will be able to help me. I have been
> using my Epson R300 printer for over 12 months with Vista Home Premium. It
> worked fine until recently when it stopped working and I got a message saying
> Windows does not recognise a usb device. a device has malfunctioned. I
> tried deleting the printer using control panel and reinstalling by plugging
> into a usb slot. I got the same message.
>
> I contacted Epson on line support and was guided through various procedures
> without success. The technician thought it was a Vista problem rather than
> the printer.
>
> As the printer is still under an extended warranty, I took it to a local
> Epson Repair Centre. The technician tested it and said he could find nothing
> wrong but he reinstalled the firmware and reset the counter.
>
> I tried again when I got home and reinstalled the printer using the "add
> printer" feature in control panel and i actually managed to print a test page
> and then a small word document. However, the next time I tried, it wouldn't
> print anything and I got the same message - usb device not recognised.
>
> Any ideas?
>
> "Alan Morris [MSFT]" wrote:
>
> > The XP Epson driver may not work on Vista.
> >
> > You can either install the Vista driver onto the XP machine (you have to
> > perform this from the Vista machine targeting the XP machine) or install the
> > printer on Vista as a local printer, creating a Local Port in the form
> > \\XPmachine\printersharename and use the R300 driver that ships with Vista.
> >
> >
> > --
> > Alan Morris
> > Windows Printing Team
> > Search the Microsoft Knowledge Base here:
> > http://support.microsoft.com/search/?adv=1
> >
> > This posting is provided "AS IS" with no warranties, and confers no rights.
> >
> > "LaurenceCook" wrote in message
> > news:439276FD-3856-4276-988B-4E687536361B@microsoft.com...
> > >I have an Epson Photo R300 printer connected to a desktop running WinXP and
> > > shared on the home network. I have a Vista Home Premium laptop on the home
> > > network and want to use the shared printer. I have gone through the add
> > > printer wizard, selected the Epson printer from the list of printers on
> > > the
> > > network, and clicked to install the driver. At this point the wizard stops
> > > responding, and the printer is not added to the Vista laptop.
> > >
> > > Any suggestions?
> >
> >
> >
date: Fri, 7 Nov 2008 05:02:05 -0800
author: Barryjt
|
|
