i have made ORM msg and send succesfully now i am getting error in getting ack i have created 1.send and Receive logical Port with binding specify later 2.two way send port solicit-response with connectionname=ORM host 10.1.8.167 Port 11000 send time out=60000 solicit response eanble =Yes submit receive location=10.1.8.167:11000 with filters BTS.MessageType==StaticAck and BTS.ReceivePortName==ReciveAck(name of my Reveport) when ack come following error show in event log Event Type: Warning Event Source: BizTalk Accelerator for HL7 Event Category: None Event ID: 8455 Date: 7/9/2008 Time: 2:41:21 PM User: N/A Computer: BTAHL7 Description: "Submit Receive Location (URI)" must not be specified on native Solicit-Response Send Port (10.1.8.167:11000). This setting is ignored; the send port will operate as native Solicit-Response port. plz help me i have deadline to meet thank you eric n other guy in anticipation url:http://www.ureader.com/gp/1202-1.aspx
Hi. I would suggest changing the "Submit Receive Location (URI) for ACK" property in your two-way MLLP send port to 127.0.0.1:65535.............or at least something different than what the send port is using (and make sure you have a receive location set to listen on this port ip...the one I provided is the default for the "TwoWayAckReceive"). Your problem is because the two addresses are the same...make them different and it should work. Thanks, Daniel Sepp Neudesic, LLC On Jul 9, 9:47 pm, "aun ali siraj" wrote: > i have made ORM msg and send succesfully now i am getting error in getting > ack > i have created > 1.send and Receive logical Port with binding specify later > 2.two way send port solicit-response > with connectionname=ORM > host 10.1.8.167 > Port 11000 > send time out=60000 > solicit response eanble =Yes > submit receive location=10.1.8.167:11000 > with filters BTS.MessageType==StaticAck and > BTS.ReceivePortName==ReciveAck(name of my Reveport) > > when ack come following error show in event log > Event Type: Warning > Event Source: BizTalk Accelerator for HL7 > Event Category: None > Event ID: 8455 > Date: 7/9/2008 > Time: 2:41:21 PM > User: N/A > Computer: BTAHL7 > Description: > "Submit Receive Location (URI)" must not be specified on native > Solicit-Response Send Port (10.1.8.167:11000). This setting is ignored; the > send port will operate as native Solicit-Response port. > > plz help me i have deadline to meet > thank you eric n other guy in anticipation > > url:http://www.ureader.com/gp/1202-1.aspx
thank alot i start working can but with warning and error message. i have change my receive port n host my pc ip i am get the ack also but don`t know why these are coming Event Type: Warning Event Source: BizTalk Accelerator for HL7 Event Category: None Event ID: 8455 Date: 7/10/2008 Time: 9:13:18 PM User: N/A Computer: BTAHL7 Description: "Submit Receive Location (URI)" must not be specified on native Solicit-Response Send Port (10.1.8.167:11000). This setting is ignored; the send port will operate as native Solicit-Response port. Username: BTAHL7\shamir.ali Time: 7/10/2008 9:13:15 PM For more information, see Help and Support Center at http://go.microsoft. com/fwlink/events.asp. Unable to log message ""Submit Receive Location (URI)" mus..." to the event log due to exception: "Object reference not set to an instance of an object.". url:http://www.ureader.com/msg/1202405.aspx
127.0.0.1:65535 if i set this ip where it will send the ack. i have one more question if i want to receive only AE Ack to orchestration so i can make error file not AA n AR i want Biztalk to handle these what BTAHL7 configration i do for Parties n which in Send MSH 5 or receivin MSH 5 thank you in advance Plz help my deadline is too near url:http://www.ureader.com/msg/1202405.aspx
The TwoWayAckReceive port is the default one which listens at 127.0.0.1:65535. You can find it in the <AllArtifacts> section of the BizTalk Admin Console...not sure what BizTalk Application you have it in. If there is none there, you can find instructions in the BTAHL7 Help, I believe, for re-creating it (or I can provide the details). For the different acknowledgement types, these are configured based on parties. So... 1. Create Parties in the BizTalk Admin Console which match the MSH values 2. Use the BTAHL7 Configuration Explorer to set up the ACKS how you want. Let me know how it works out. Thanks, Daniel Sepp Neudesic, LLC On Jul 10, 10:24 pm, "aun ali siraj" wrote: > 127.0.0.1:65535 if i set this ip where it will send the ack. > i have one more question if i want to receive only AE Ack to orchestration > so i can make error file not AA n AR i want Biztalk to handle these what > BTAHL7 configration i do for Parties n which in Send MSH 5 or receivin MSH 5 > > thank you in advance > Plz help my deadline is too near > > url:http://www.ureader.com/msg/1202405.aspx
