I have run my exchange 2K server for some time. I have recently changed my ISP and have a new static IP address. I have changed this new static IP address with my public dns servers a few days ago. The problem now is that I can send mail internal and external to any other address. However this mail flow is not coming in. any suggestion. If someone would like to test my domain it is wbafn.com. Thanks for your suggestions
Hi, Your server doesn't answer SMTP connection attempts: http://www.checkdns.net/quickcheck.aspx?domain=wbafn.com&detailed=1 Did you reconfigure your firewall to redirect the new IP address to your Exchange server? Leif "Patrick Brennan" skrev i en meddelelse news:A7FE99CE-811F-4E5F-A405-FE24F4B346AA@microsoft.com... > I have run my exchange 2K server for some time. I have recently changed my > ISP and have a new static IP address. I have changed this new static IP > address with my public dns servers a few days ago. The problem now is that I > can send mail internal and external to any other address. However this mail > flow is not coming in. any suggestion. If someone would like to test my > domain it is wbafn.com. > > Thanks for your suggestions
no firewall cofiguration changes have been made. However because I am using a new ISP do you think I have to reconfigure my SMTP. "Leif Pedersen [MVP]" wrote: > Hi, > > Your server doesn't answer SMTP connection attempts: > http://www.checkdns.net/quickcheck.aspx?domain=wbafn.com&detailed=1 > > Did you reconfigure your firewall to redirect the new IP address to your > Exchange server? > > Leif > > > "Patrick Brennan" skrev i en > meddelelse news:A7FE99CE-811F-4E5F-A405-FE24F4B346AA@microsoft.com... > > I have run my exchange 2K server for some time. I have recently changed my > > ISP and have a new static IP address. I have changed this new static IP > > address with my public dns servers a few days ago. The problem now is that > I > > can send mail internal and external to any other address. However this > mail > > flow is not coming in. any suggestion. If someone would like to test my > > domain it is wbafn.com. > > > > Thanks for your suggestions > > >
Hi, It should not be necessary to reconfigure your SMTP (it is probably configured to receive SMTP mails from all external IP addresses). I would have a look at firewall config just in case - as I wrote in my first post your server does not respond to SMTP connect attempt and this could be caused by the firewall blocking. Leif "Patrick Brennan" skrev i en meddelelse news:F8CC1800-0424-4E7A-8916-0F4A38483CFF@microsoft.com... > no firewall cofiguration changes have been made. However because I am using a > new ISP do you think I have to reconfigure my SMTP. > > "Leif Pedersen [MVP]" wrote: > > > Hi, > > > > Your server doesn't answer SMTP connection attempts: > > http://www.checkdns.net/quickcheck.aspx?domain=wbafn.com&detailed=1 > > > > Did you reconfigure your firewall to redirect the new IP address to your > > Exchange server? > > > > Leif > > > > > > "Patrick Brennan" skrev i en > > meddelelse news:A7FE99CE-811F-4E5F-A405-FE24F4B346AA@microsoft.com... > > > I have run my exchange 2K server for some time. I have recently changed my > > > ISP and have a new static IP address. I have changed this new static IP > > > address with my public dns servers a few days ago. The problem now is that > > I > > > can send mail internal and external to any other address. However this > > mail > > > flow is not coming in. any suggestion. If someone would like to test my > > > domain it is wbafn.com. > > > > > > Thanks for your suggestions > > > > > >
The only configuring change I have made to my exchange networks is that I have changed from a dial up network to a hi speed satellite solution. A new DW6000 Direcway modem has been installed and I do not believe there is a firewall built in to it. Do u have any knowledge if there is. Here is the URL for the modem from the companies site if you would not mind reviewing. http://dssweb01.mydirecway.com/mydw/common/2way/dw6-overview.jsp "Leif Pedersen [MVP]" wrote: > Hi, > > It should not be necessary to reconfigure your SMTP (it is probably > configured to receive SMTP mails from all external IP addresses). > > I would have a look at firewall config just in case - as I wrote in my first > post your server does not respond to SMTP connect attempt and this could be > caused by the firewall blocking. > > Leif > > "Patrick Brennan" skrev i en > meddelelse news:F8CC1800-0424-4E7A-8916-0F4A38483CFF@microsoft.com... > > no firewall cofiguration changes have been made. However because I am > using a > > new ISP do you think I have to reconfigure my SMTP. > > > > "Leif Pedersen [MVP]" wrote: > > > > > Hi, > > > > > > Your server doesn't answer SMTP connection attempts: > > > http://www.checkdns.net/quickcheck.aspx?domain=wbafn.com&detailed=1 > > > > > > Did you reconfigure your firewall to redirect the new IP address to your > > > Exchange server? > > > > > > Leif > > > > > > > > > "Patrick Brennan" skrev i en > > > meddelelse news:A7FE99CE-811F-4E5F-A405-FE24F4B346AA@microsoft.com... > > > > I have run my exchange 2K server for some time. I have recently > changed my > > > > ISP and have a new static IP address. I have changed this new static > IP > > > > address with my public dns servers a few days ago. The problem now is > that > > > I > > > > can send mail internal and external to any other address. However this > > > mail > > > > flow is not coming in. any suggestion. If someone would like to test > my > > > > domain it is wbafn.com. > > > > > > > > Thanks for your suggestions > > > > > > > > > > > >
Hi, I don't have any experience with that modem, but as I assume that you only have 1 public IP address, this IP address has to be forwarded to the exchange server on port 25 so there has to be some configuration that needs to be done in the modem. Leif "Patrick Brennan" skrev i en meddelelse news:7385E02D-C4C0-4E13-8809-F14E34002E0F@microsoft.com... > The only configuring change I have made to my exchange networks is that I > have changed from a dial up network to a hi speed satellite solution. A new > DW6000 Direcway modem has been installed and I do not believe there is a > firewall built in to it. Do u have any knowledge if there is. Here is the URL > for the modem from the companies site if you would not mind reviewing. > > http://dssweb01.mydirecway.com/mydw/common/2way/dw6-overview.jsp > > "Leif Pedersen [MVP]" wrote: > > > Hi, > > > > It should not be necessary to reconfigure your SMTP (it is probably > > configured to receive SMTP mails from all external IP addresses). > > > > I would have a look at firewall config just in case - as I wrote in my first > > post your server does not respond to SMTP connect attempt and this could be > > caused by the firewall blocking. > > > > Leif > > > > "Patrick Brennan" skrev i en > > meddelelse news:F8CC1800-0424-4E7A-8916-0F4A38483CFF@microsoft.com... > > > no firewall cofiguration changes have been made. However because I am > > using a > > > new ISP do you think I have to reconfigure my SMTP. > > > > > > "Leif Pedersen [MVP]" wrote: > > > > > > > Hi, > > > > > > > > Your server doesn't answer SMTP connection attempts: > > > > http://www.checkdns.net/quickcheck.aspx?domain=wbafn.com&detailed=1 > > > > > > > > Did you reconfigure your firewall to redirect the new IP address to your > > > > Exchange server? > > > > > > > > Leif > > > > > > > > > > > > "Patrick Brennan" skrev i en > > > > meddelelse news:A7FE99CE-811F-4E5F-A405-FE24F4B346AA@microsoft.com... > > > > > I have run my exchange 2K server for some time. I have recently > > changed my > > > > > ISP and have a new static IP address. I have changed this new static > > IP > > > > > address with my public dns servers a few days ago. The problem now is > > that > > > > I > > > > > can send mail internal and external to any other address. However this > > > > mail > > > > > flow is not coming in. any suggestion. If someone would like to test > > my > > > > > domain it is wbafn.com. > > > > > > > > > > Thanks for your suggestions > > > > > > > > > > > > > > > > > >
Is there any chance that this DW6000 modem does not have an option to forward smtp on port 25. From your review for the wbafn.com domain does ths DNS look good on the public dns servers. "Leif Pedersen [MVP]" wrote: > Hi, > > I don't have any experience with that modem, but as I assume that you only > have 1 public IP address, this IP address has to be forwarded to the > exchange server on port 25 so there has to be some configuration that needs > to be done in the modem. > > Leif > > "Patrick Brennan" skrev i en > meddelelse news:7385E02D-C4C0-4E13-8809-F14E34002E0F@microsoft.com... > > The only configuring change I have made to my exchange networks is that I > > have changed from a dial up network to a hi speed satellite solution. A > new > > DW6000 Direcway modem has been installed and I do not believe there is a > > firewall built in to it. Do u have any knowledge if there is. Here is the > URL > > for the modem from the companies site if you would not mind reviewing. > > > > http://dssweb01.mydirecway.com/mydw/common/2way/dw6-overview.jsp > > > > "Leif Pedersen [MVP]" wrote: > > > > > Hi, > > > > > > It should not be necessary to reconfigure your SMTP (it is probably > > > configured to receive SMTP mails from all external IP addresses). > > > > > > I would have a look at firewall config just in case - as I wrote in my > first > > > post your server does not respond to SMTP connect attempt and this could > be > > > caused by the firewall blocking. > > > > > > Leif > > > > > > "Patrick Brennan" skrev i en > > > meddelelse news:F8CC1800-0424-4E7A-8916-0F4A38483CFF@microsoft.com... > > > > no firewall cofiguration changes have been made. However because I am > > > using a > > > > new ISP do you think I have to reconfigure my SMTP. > > > > > > > > "Leif Pedersen [MVP]" wrote: > > > > > > > > > Hi, > > > > > > > > > > Your server doesn't answer SMTP connection attempts: > > > > > http://www.checkdns.net/quickcheck.aspx?domain=wbafn.com&detailed=1 > > > > > > > > > > Did you reconfigure your firewall to redirect the new IP address to > your > > > > > Exchange server? > > > > > > > > > > Leif > > > > > > > > > > > > > > > "Patrick Brennan" skrev i > en > > > > > meddelelse > news:A7FE99CE-811F-4E5F-A405-FE24F4B346AA@microsoft.com... > > > > > > I have run my exchange 2K server for some time. I have recently > > > changed my > > > > > > ISP and have a new static IP address. I have changed this new > static > > > IP > > > > > > address with my public dns servers a few days ago. The problem now > is > > > that > > > > > I > > > > > > can send mail internal and external to any other address. However > this > > > > > mail > > > > > > flow is not coming in. any suggestion. If someone would like to > test > > > my > > > > > > domain it is wbafn.com. > > > > > > > > > > > > Thanks for your suggestions > > > > > > > > > > > > > > > > > > > > > > > > > > >
