Hi everyone,

I have a Exchange 2000 std with windows 2000 running on Windows 2003 AD 
I have added a new HW with windows 2003 in to my existing 2003 AD. Installed 
the exchange 2003 and done the replication. For testing purpose before moving 
all the mail boxes I moved two mail boxes to test send and receive, 
internally send and receive  between the two mail boxes in the new server 
works fine as well as the internal send and recive between the the mail boxes 
in the existing exchange 2000 works well. Also external mail send/receive 
works with both servers, but when I send internal mail from exchange 2000 to 
exchange 2003 mail box, it's works fine as well but when I send internally 
from the exchange 2003 new server mail box to the exchange 2000 server mail 
box, it's not working. I donot have any error logs in the event viewer even 
though after I enabled the dignostic logging. But I can see the mails send 
from one server to another stayed in the SMTP queue. Is that usual? If not, 

Please advice me how I can resolve this issue before moving the mail boxes 
and bring down the exchange 2000 server.

Thank you

-- 
Eric

Do you get NDR?
Try to send email manually from Ex2003 to Ex2000 box.
telnet "Exch2000BoxName" 25
helo
mail from:
rcpt to:
data
..

Let us know what happens!

-- 
Regards,
Sasa Milovanovic
MCSE:Messaging
sasa.milovanovic(at)exchangemaster.net

"Eric"  wrote in message 
news:521E3D3E-396C-4211-A4D7-E5A8C839D5D0@microsoft.com...
> Hi everyone,
>
> I have a Exchange 2000 std with windows 2000 running on Windows 2003 AD
> I have added a new HW with windows 2003 in to my existing 2003 AD. 
> Installed
> the exchange 2003 and done the replication. For testing purpose before 
> moving
> all the mail boxes I moved two mail boxes to test send and receive,
> internally send and receive  between the two mail boxes in the new server
> works fine as well as the internal send and recive between the the mail 
> boxes
> in the existing exchange 2000 works well. Also external mail send/receive
> works with both servers, but when I send internal mail from exchange 2000 
> to
> exchange 2003 mail box, it's works fine as well but when I send internally
> from the exchange 2003 new server mail box to the exchange 2000 server 
> mail
> box, it's not working. I donot have any error logs in the event viewer 
> even
> though after I enabled the dignostic logging. But I can see the mails send
> from one server to another stayed in the SMTP queue. Is that usual? If 
> not,
>
> Please advice me how I can resolve this issue before moving the mail boxes
> and bring down the exchange 2000 server.
>
> Thank you
>
> -- 
> Eric

220 myservername.mydomain Microsoft ESMTP MAIL Service, Version: 6.0.3790
..1830 ready at  Wed, 31 Aug 2005 14:14:26 -0400
250 myservername.mydomain Hello [192.168.1.8]
250 2.1.0 xyz@mydomain....Sender OK
250 2.1.5 abc@mydomain.com
500 5.3.3 Unrecognized command
354 Start mail input; end with <CRLF>.<CRLF>
250 2.6.0 <myservernameR8lH700000001@myservername.mydomain> Queued mail for 
delivery
451 Timeout waiting for client input


Also I received a NDR as follows,
the email account does not exist at the organization this message was sent 
to. check the emai address or contact the receipient directly to find out the 
correct address.
<myservername.mydomain#5.1.1>

I enabled the MS exchange transport protocol at the diagnostic logging of 
new server and getting a warning application event viwer ID 4006




-- 
Eric

-- 
Eric


"Sasa Milovanovic" wrote:

> Do you get NDR?
> Try to send email manually from Ex2003 to Ex2000 box.
> telnet "Exch2000BoxName" 25
> helo
> mail from:
> rcpt to:
> data
> ..
> 
> Let us know what happens!
> 
> -- 
> Regards,
> Sasa Milovanovic
> MCSE:Messaging
> sasa.milovanovic(at)exchangemaster.net
> 
> "Eric"  wrote in message 
> news:521E3D3E-396C-4211-A4D7-E5A8C839D5D0@microsoft.com...
> > Hi everyone,
> >
> > I have a Exchange 2000 std with windows 2000 running on Windows 2003 AD
> > I have added a new HW with windows 2003 in to my existing 2003 AD. 
> > Installed
> > the exchange 2003 and done the replication. For testing purpose before 
> > moving
> > all the mail boxes I moved two mail boxes to test send and receive,
> > internally send and receive  between the two mail boxes in the new server
> > works fine as well as the internal send and recive between the the mail 
> > boxes
> > in the existing exchange 2000 works well. Also external mail send/receive
> > works with both servers, but when I send internal mail from exchange 2000 
> > to
> > exchange 2003 mail box, it's works fine as well but when I send internally
> > from the exchange 2003 new server mail box to the exchange 2000 server 
> > mail
> > box, it's not working. I donot have any error logs in the event viewer 
> > even
> > though after I enabled the dignostic logging. But I can see the mails send
> > from one server to another stayed in the SMTP queue. Is that usual? If 
> > not,
> >
> > Please advice me how I can resolve this issue before moving the mail boxes
> > and bring down the exchange 2000 server.
> >
> > Thank you
> >
> > -- 
> > Eric 
> 
> 
>

Hi Sasa,

Pls. ignore the earlier my reply.

Following the  details of the telnet,

220 myserver.mydomain Microsoft ESMTP MAIL Service, Version: 6.0.3790
..1830 ready at  Wed, 31 Aug 2005 14:47:16 -0400
helo
250 myserver.mydomain Hello [192.168.1.41]
mail from: abc@mydomain
250 2.1.0 abc@mydomain....Sender OK
rcpt to: xyz@mydomain
250 2.1.5 xyz@mydomain
data
354 Start mail input; end with <CRLF>.<CRLF>
test msg.
thanks
..
250 2.6.0 <myserveru11VX00000002@myserver.mydomain> Queued mail
 for delivery
quit
221 2.0.0 myserver.mydomain Service closing transmission channel

Also I ena
Also I received a NDR as follows,
the email account does not exist at the organization this message was sent 
to. check the emai address or contact the receipient directly to find out the 
correct address.
<myservername.mydomain#5.1.1>

I enabled the MS exchange transport protocol at the diagnostic logging of 
new server and getting a warning application event viwer ID 4006

-- 
Eric


"Sasa Milovanovic" wrote:

> Do you get NDR?
> Try to send email manually from Ex2003 to Ex2000 box.
> telnet "Exch2000BoxName" 25
> helo
> mail from:
> rcpt to:
> data
> ..
> 
> Let us know what happens!
> 
> -- 
> Regards,
> Sasa Milovanovic
> MCSE:Messaging
> sasa.milovanovic(at)exchangemaster.net
> 
> "Eric"  wrote in message 
> news:521E3D3E-396C-4211-A4D7-E5A8C839D5D0@microsoft.com...
> > Hi everyone,
> >
> > I have a Exchange 2000 std with windows 2000 running on Windows 2003 AD
> > I have added a new HW with windows 2003 in to my existing 2003 AD. 
> > Installed
> > the exchange 2003 and done the replication. For testing purpose before 
> > moving
> > all the mail boxes I moved two mail boxes to test send and receive,
> > internally send and receive  between the two mail boxes in the new server
> > works fine as well as the internal send and recive between the the mail 
> > boxes
> > in the existing exchange 2000 works well. Also external mail send/receive
> > works with both servers, but when I send internal mail from exchange 2000 
> > to
> > exchange 2003 mail box, it's works fine as well but when I send internally
> > from the exchange 2003 new server mail box to the exchange 2000 server 
> > mail
> > box, it's not working. I donot have any error logs in the event viewer 
> > even
> > though after I enabled the dignostic logging. But I can see the mails send
> > from one server to another stayed in the SMTP queue. Is that usual? If 
> > not,
> >
> > Please advice me how I can resolve this issue before moving the mail boxes
> > and bring down the exchange 2000 server.
> >
> > Thank you
> >
> > -- 
> > Eric 
> 
> 
>

Have you used existing email addresses in telnet test or those written 
below?

-- 
Regards,
Sasa Milovanovic
MCSE:Messaging
sasa.milovanovic(at)exchangemaster.net

"Eric"  wrote in message 
news:D3AA726C-33E1-43AB-B94C-8FF1635C132F@microsoft.com...
> Hi Sasa,
>
> Pls. ignore the earlier my reply.
>
> Following the  details of the telnet,
>
> 220 myserver.mydomain Microsoft ESMTP MAIL Service, Version: 6.0.3790
> .1830 ready at  Wed, 31 Aug 2005 14:47:16 -0400
> helo
> 250 myserver.mydomain Hello [192.168.1.41]
> mail from: abc@mydomain
> 250 2.1.0 abc@mydomain....Sender OK
> rcpt to: xyz@mydomain
> 250 2.1.5 xyz@mydomain
> data
> 354 Start mail input; end with <CRLF>.<CRLF>
> test msg.
> thanks
> .
> 250 2.6.0 <myserveru11VX00000002@myserver.mydomain> Queued mail
> for delivery
> quit
> 221 2.0.0 myserver.mydomain Service closing transmission channel
>
> Also I ena
> Also I received a NDR as follows,
> the email account does not exist at the organization this message was sent
> to. check the emai address or contact the receipient directly to find out 
> the
> correct address.
> <myservername.mydomain#5.1.1>
>
> I enabled the MS exchange transport protocol at the diagnostic logging of
> new server and getting a warning application event viwer ID 4006
>
> -- 
> Eric
>
>
> "Sasa Milovanovic" wrote:
>
>> Do you get NDR?
>> Try to send email manually from Ex2003 to Ex2000 box.
>> telnet "Exch2000BoxName" 25
>> helo
>> mail from:
>> rcpt to:
>> data
>> ..
>>
>> Let us know what happens!
>>
>> -- 
>> Regards,
>> Sasa Milovanovic
>> MCSE:Messaging
>> sasa.milovanovic(at)exchangemaster.net
>>
>> "Eric"  wrote in message
>> news:521E3D3E-396C-4211-A4D7-E5A8C839D5D0@microsoft.com...
>> > Hi everyone,
>> >
>> > I have a Exchange 2000 std with windows 2000 running on Windows 2003 AD
>> > I have added a new HW with windows 2003 in to my existing 2003 AD.
>> > Installed
>> > the exchange 2003 and done the replication. For testing purpose before
>> > moving
>> > all the mail boxes I moved two mail boxes to test send and receive,
>> > internally send and receive  between the two mail boxes in the new 
>> > server
>> > works fine as well as the internal send and recive between the the mail
>> > boxes
>> > in the existing exchange 2000 works well. Also external mail 
>> > send/receive
>> > works with both servers, but when I send internal mail from exchange 
>> > 2000
>> > to
>> > exchange 2003 mail box, it's works fine as well but when I send 
>> > internally
>> > from the exchange 2003 new server mail box to the exchange 2000 server
>> > mail
>> > box, it's not working. I donot have any error logs in the event viewer
>> > even
>> > though after I enabled the dignostic logging. But I can see the mails 
>> > send
>> > from one server to another stayed in the SMTP queue. Is that usual? If
>> > not,
>> >
>> > Please advice me how I can resolve this issue before moving the mail 
>> > boxes
>> > and bring down the exchange 2000 server.
>> >
>> > Thank you
>> >
>> > -- 
>> > Eric
>>
>>
>>

Hi sasa,

I tested with the existing active e-mail addresses

thanks

-- 
Eric


"Sasa Milovanovic" wrote:

> Have you used existing email addresses in telnet test or those written 
> below?
> 
> -- 
> Regards,
> Sasa Milovanovic
> MCSE:Messaging
> sasa.milovanovic(at)exchangemaster.net
> 
> "Eric"  wrote in message 
> news:D3AA726C-33E1-43AB-B94C-8FF1635C132F@microsoft.com...
> > Hi Sasa,
> >
> > Pls. ignore the earlier my reply.
> >
> > Following the  details of the telnet,
> >
> > 220 myserver.mydomain Microsoft ESMTP MAIL Service, Version: 6.0.3790
> > .1830 ready at  Wed, 31 Aug 2005 14:47:16 -0400
> > helo
> > 250 myserver.mydomain Hello [192.168.1.41]
> > mail from: abc@mydomain
> > 250 2.1.0 abc@mydomain....Sender OK
> > rcpt to: xyz@mydomain
> > 250 2.1.5 xyz@mydomain
> > data
> > 354 Start mail input; end with <CRLF>.<CRLF>
> > test msg.
> > thanks
> > .
> > 250 2.6.0 <myserveru11VX00000002@myserver.mydomain> Queued mail
> > for delivery
> > quit
> > 221 2.0.0 myserver.mydomain Service closing transmission channel
> >
> > Also I ena
> > Also I received a NDR as follows,
> > the email account does not exist at the organization this message was sent
> > to. check the emai address or contact the receipient directly to find out 
> > the
> > correct address.
> > <myservername.mydomain#5.1.1>
> >
> > I enabled the MS exchange transport protocol at the diagnostic logging of
> > new server and getting a warning application event viwer ID 4006
> >
> > -- 
> > Eric
> >
> >
> > "Sasa Milovanovic" wrote:
> >
> >> Do you get NDR?
> >> Try to send email manually from Ex2003 to Ex2000 box.
> >> telnet "Exch2000BoxName" 25
> >> helo
> >> mail from:
> >> rcpt to:
> >> data
> >> ..
> >>
> >> Let us know what happens!
> >>
> >> -- 
> >> Regards,
> >> Sasa Milovanovic
> >> MCSE:Messaging
> >> sasa.milovanovic(at)exchangemaster.net
> >>
> >> "Eric"  wrote in message
> >> news:521E3D3E-396C-4211-A4D7-E5A8C839D5D0@microsoft.com...
> >> > Hi everyone,
> >> >
> >> > I have a Exchange 2000 std with windows 2000 running on Windows 2003 AD
> >> > I have added a new HW with windows 2003 in to my existing 2003 AD.
> >> > Installed
> >> > the exchange 2003 and done the replication. For testing purpose before
> >> > moving
> >> > all the mail boxes I moved two mail boxes to test send and receive,
> >> > internally send and receive  between the two mail boxes in the new 
> >> > server
> >> > works fine as well as the internal send and recive between the the mail
> >> > boxes
> >> > in the existing exchange 2000 works well. Also external mail 
> >> > send/receive
> >> > works with both servers, but when I send internal mail from exchange 
> >> > 2000
> >> > to
> >> > exchange 2003 mail box, it's works fine as well but when I send 
> >> > internally
> >> > from the exchange 2003 new server mail box to the exchange 2000 server
> >> > mail
> >> > box, it's not working. I donot have any error logs in the event viewer
> >> > even
> >> > though after I enabled the dignostic logging. But I can see the mails 
> >> > send
> >> > from one server to another stayed in the SMTP queue. Is that usual? If
> >> > not,
> >> >
> >> > Please advice me how I can resolve this issue before moving the mail 
> >> > boxes
> >> > and bring down the exchange 2000 server.
> >> >
> >> > Thank you
> >> >
> >> > -- 
> >> > Eric
> >>
> >>
> >> 
> 
> 
>

Some common reasons for 4006 Warning event include the following:
  a.. The connection was dropped by the remote host.

  b.. The remote SMTP service rejected AUTH negotiation.

  c.. The server trying to deliver the message cannot access the message 
delivery information in the message.

  d.. An SMTP protocol error occurred.

  e.. The server that is trying to deliver the message cannot connect to the 
remote server.

  f.. If a smart host has been specified in the properties of the SMTP 
virtual server, this event can be logged if the smart host is unreachable 
for any reason.

Note   This event can also be logged when the Mail Host Filtering feature of 
Sybari Antigen Antivirus Software is enabled. Disabling that feature may 
resolve this issue


-- 
Regards,
Sasa Milovanovic
MCSE:Messaging
sasa.milovanovic(at)exchangemaster.net

"Eric"  wrote in message 
news:59A2BB22-56EE-4ABA-B9FE-BDC5967A97ED@microsoft.com...
> Hi sasa,
>
> I tested with the existing active e-mail addresses
>
> thanks
>
> -- 
> Eric
>
>
> "Sasa Milovanovic" wrote:
>
>> Have you used existing email addresses in telnet test or those written
>> below?
>>
>> -- 
>> Regards,
>> Sasa Milovanovic
>> MCSE:Messaging
>> sasa.milovanovic(at)exchangemaster.net
>>
>> "Eric"  wrote in message
>> news:D3AA726C-33E1-43AB-B94C-8FF1635C132F@microsoft.com...
>> > Hi Sasa,
>> >
>> > Pls. ignore the earlier my reply.
>> >
>> > Following the  details of the telnet,
>> >
>> > 220 myserver.mydomain Microsoft ESMTP MAIL Service, Version: 6.0.3790
>> > .1830 ready at  Wed, 31 Aug 2005 14:47:16 -0400
>> > helo
>> > 250 myserver.mydomain Hello [192.168.1.41]
>> > mail from: abc@mydomain
>> > 250 2.1.0 abc@mydomain....Sender OK
>> > rcpt to: xyz@mydomain
>> > 250 2.1.5 xyz@mydomain
>> > data
>> > 354 Start mail input; end with <CRLF>.<CRLF>
>> > test msg.
>> > thanks
>> > .
>> > 250 2.6.0 <myserveru11VX00000002@myserver.mydomain> Queued mail
>> > for delivery
>> > quit
>> > 221 2.0.0 myserver.mydomain Service closing transmission channel
>> >
>> > Also I ena
>> > Also I received a NDR as follows,
>> > the email account does not exist at the organization this message was 
>> > sent
>> > to. check the emai address or contact the receipient directly to find 
>> > out
>> > the
>> > correct address.
>> > <myservername.mydomain#5.1.1>
>> >
>> > I enabled the MS exchange transport protocol at the diagnostic logging 
>> > of
>> > new server and getting a warning application event viwer ID 4006
>> >
>> > -- 
>> > Eric
>> >
>> >
>> > "Sasa Milovanovic" wrote:
>> >
>> >> Do you get NDR?
>> >> Try to send email manually from Ex2003 to Ex2000 box.
>> >> telnet "Exch2000BoxName" 25
>> >> helo
>> >> mail from:
>> >> rcpt to:
>> >> data
>> >> ..
>> >>
>> >> Let us know what happens!
>> >>
>> >> -- 
>> >> Regards,
>> >> Sasa Milovanovic
>> >> MCSE:Messaging
>> >> sasa.milovanovic(at)exchangemaster.net
>> >>
>> >> "Eric"  wrote in message
>> >> news:521E3D3E-396C-4211-A4D7-E5A8C839D5D0@microsoft.com...
>> >> > Hi everyone,
>> >> >
>> >> > I have a Exchange 2000 std with windows 2000 running on Windows 2003 
>> >> > AD
>> >> > I have added a new HW with windows 2003 in to my existing 2003 AD.
>> >> > Installed
>> >> > the exchange 2003 and done the replication. For testing purpose 
>> >> > before
>> >> > moving
>> >> > all the mail boxes I moved two mail boxes to test send and receive,
>> >> > internally send and receive  between the two mail boxes in the new
>> >> > server
>> >> > works fine as well as the internal send and recive between the the 
>> >> > mail
>> >> > boxes
>> >> > in the existing exchange 2000 works well. Also external mail
>> >> > send/receive
>> >> > works with both servers, but when I send internal mail from exchange
>> >> > 2000
>> >> > to
>> >> > exchange 2003 mail box, it's works fine as well but when I send
>> >> > internally
>> >> > from the exchange 2003 new server mail box to the exchange 2000 
>> >> > server
>> >> > mail
>> >> > box, it's not working. I donot have any error logs in the event 
>> >> > viewer
>> >> > even
>> >> > though after I enabled the dignostic logging. But I can see the 
>> >> > mails
>> >> > send
>> >> > from one server to another stayed in the SMTP queue. Is that usual? 
>> >> > If
>> >> > not,
>> >> >
>> >> > Please advice me how I can resolve this issue before moving the mail
>> >> > boxes
>> >> > and bring down the exchange 2000 server.
>> >> >
>> >> > Thank you
>> >> >
>> >> > -- 
>> >> > Eric
>> >>
>> >>
>> >>
>>
>>
>>

Hi Sasa,

I don't understand since it is a internal mail why is it looking for smtp. 
Should be x.400 isn't it? How can I track where this problem occur? I 
compared all the settings with exchange 2000 and match perfectly ok, 
including security to the mail boxes plus storage groups. In my routing 
groups  members the exchange 2003 is master and the ex2000 is member is that 
OK?

pls. advice

-- 
Eric


"Sasa Milovanovic" wrote:

> Some common reasons for 4006 Warning event include the following:
>   a.. The connection was dropped by the remote host.
> 
>   b.. The remote SMTP service rejected AUTH negotiation.
> 
>   c.. The server trying to deliver the message cannot access the message 
> delivery information in the message.
> 
>   d.. An SMTP protocol error occurred.
> 
>   e.. The server that is trying to deliver the message cannot connect to the 
> remote server.
> 
>   f.. If a smart host has been specified in the properties of the SMTP 
> virtual server, this event can be logged if the smart host is unreachable 
> for any reason.
> 
> Note   This event can also be logged when the Mail Host Filtering feature of 
> Sybari Antigen Antivirus Software is enabled. Disabling that feature may 
> resolve this issue
> 
> 
> -- 
> Regards,
> Sasa Milovanovic
> MCSE:Messaging
> sasa.milovanovic(at)exchangemaster.net
> 
> "Eric"  wrote in message 
> news:59A2BB22-56EE-4ABA-B9FE-BDC5967A97ED@microsoft.com...
> > Hi sasa,
> >
> > I tested with the existing active e-mail addresses
> >
> > thanks
> >
> > -- 
> > Eric
> >
> >
> > "Sasa Milovanovic" wrote:
> >
> >> Have you used existing email addresses in telnet test or those written
> >> below?
> >>
> >> -- 
> >> Regards,
> >> Sasa Milovanovic
> >> MCSE:Messaging
> >> sasa.milovanovic(at)exchangemaster.net
> >>
> >> "Eric"  wrote in message
> >> news:D3AA726C-33E1-43AB-B94C-8FF1635C132F@microsoft.com...
> >> > Hi Sasa,
> >> >
> >> > Pls. ignore the earlier my reply.
> >> >
> >> > Following the  details of the telnet,
> >> >
> >> > 220 myserver.mydomain Microsoft ESMTP MAIL Service, Version: 6.0.3790
> >> > .1830 ready at  Wed, 31 Aug 2005 14:47:16 -0400
> >> > helo
> >> > 250 myserver.mydomain Hello [192.168.1.41]
> >> > mail from: abc@mydomain
> >> > 250 2.1.0 abc@mydomain....Sender OK
> >> > rcpt to: xyz@mydomain
> >> > 250 2.1.5 xyz@mydomain
> >> > data
> >> > 354 Start mail input; end with <CRLF>.<CRLF>
> >> > test msg.
> >> > thanks
> >> > .
> >> > 250 2.6.0 <myserveru11VX00000002@myserver.mydomain> Queued mail
> >> > for delivery
> >> > quit
> >> > 221 2.0.0 myserver.mydomain Service closing transmission channel
> >> >
> >> > Also I ena
> >> > Also I received a NDR as follows,
> >> > the email account does not exist at the organization this message was 
> >> > sent
> >> > to. check the emai address or contact the receipient directly to find 
> >> > out
> >> > the
> >> > correct address.
> >> > <myservername.mydomain#5.1.1>
> >> >
> >> > I enabled the MS exchange transport protocol at the diagnostic logging 
> >> > of
> >> > new server and getting a warning application event viwer ID 4006
> >> >
> >> > -- 
> >> > Eric
> >> >
> >> >
> >> > "Sasa Milovanovic" wrote:
> >> >
> >> >> Do you get NDR?
> >> >> Try to send email manually from Ex2003 to Ex2000 box.
> >> >> telnet "Exch2000BoxName" 25
> >> >> helo
> >> >> mail from:
> >> >> rcpt to:
> >> >> data
> >> >> ..
> >> >>
> >> >> Let us know what happens!
> >> >>
> >> >> -- 
> >> >> Regards,
> >> >> Sasa Milovanovic
> >> >> MCSE:Messaging
> >> >> sasa.milovanovic(at)exchangemaster.net
> >> >>
> >> >> "Eric"  wrote in message
> >> >> news:521E3D3E-396C-4211-A4D7-E5A8C839D5D0@microsoft.com...
> >> >> > Hi everyone,
> >> >> >
> >> >> > I have a Exchange 2000 std with windows 2000 running on Windows 2003 
> >> >> > AD
> >> >> > I have added a new HW with windows 2003 in to my existing 2003 AD.
> >> >> > Installed
> >> >> > the exchange 2003 and done the replication. For testing purpose 
> >> >> > before
> >> >> > moving
> >> >> > all the mail boxes I moved two mail boxes to test send and receive,
> >> >> > internally send and receive  between the two mail boxes in the new
> >> >> > server
> >> >> > works fine as well as the internal send and recive between the the 
> >> >> > mail
> >> >> > boxes
> >> >> > in the existing exchange 2000 works well. Also external mail
> >> >> > send/receive
> >> >> > works with both servers, but when I send internal mail from exchange
> >> >> > 2000
> >> >> > to
> >> >> > exchange 2003 mail box, it's works fine as well but when I send
> >> >> > internally
> >> >> > from the exchange 2003 new server mail box to the exchange 2000 
> >> >> > server
> >> >> > mail
> >> >> > box, it's not working. I donot have any error logs in the event 
> >> >> > viewer
> >> >> > even
> >> >> > though after I enabled the dignostic logging. But I can see the 
> >> >> > mails
> >> >> > send
> >> >> > from one server to another stayed in the SMTP queue. Is that usual? 
> >> >> > If
> >> >> > not,
> >> >> >
> >> >> > Please advice me how I can resolve this issue before moving the mail
> >> >> > boxes
> >> >> > and bring down the exchange 2000 server.
> >> >> >
> >> >> > Thank you
> >> >> >
> >> >> > -- 
> >> >> > Eric
> >> >>
> >> >>
> >> >>
> >>
> >>
> >> 
> 
> 
>

Nop, messages between Exchange servers are transfered thru SMTP.
Exchange Master server just takes care about link state table so it should 
not cause any problems.

Are you maybe using smart host?


-- 
Regards,
Sasa Milovanovic
MCSE:Messaging
sasa.milovanovic(at)exchangemaster.net


"Eric"  wrote in message 
news:1FAE3453-BA89-4C5D-BEBD-FF8E2007E9C9@microsoft.com...
> Hi Sasa,
>
> I don't understand since it is a internal mail why is it looking for smtp.
> Should be x.400 isn't it? How can I track where this problem occur? I
> compared all the settings with exchange 2000 and match perfectly ok,
> including security to the mail boxes plus storage groups. In my routing
> groups  members the exchange 2003 is master and the ex2000 is member is 
> that
> OK?
>
> pls. advice
>
> -- 
> Eric
>
>
> "Sasa Milovanovic" wrote:
>
>> Some common reasons for 4006 Warning event include the following:
>>   a.. The connection was dropped by the remote host.
>>
>>   b.. The remote SMTP service rejected AUTH negotiation.
>>
>>   c.. The server trying to deliver the message cannot access the message
>> delivery information in the message.
>>
>>   d.. An SMTP protocol error occurred.
>>
>>   e.. The server that is trying to deliver the message cannot connect to 
>> the
>> remote server.
>>
>>   f.. If a smart host has been specified in the properties of the SMTP
>> virtual server, this event can be logged if the smart host is unreachable
>> for any reason.
>>
>> Note   This event can also be logged when the Mail Host Filtering feature 
>> of
>> Sybari Antigen Antivirus Software is enabled. Disabling that feature may
>> resolve this issue
>>
>>
>> -- 
>> Regards,
>> Sasa Milovanovic
>> MCSE:Messaging
>> sasa.milovanovic(at)exchangemaster.net
>>
>> "Eric"  wrote in message
>> news:59A2BB22-56EE-4ABA-B9FE-BDC5967A97ED@microsoft.com...
>> > Hi sasa,
>> >
>> > I tested with the existing active e-mail addresses
>> >
>> > thanks
>> >
>> > -- 
>> > Eric
>> >
>> >
>> > "Sasa Milovanovic" wrote:
>> >
>> >> Have you used existing email addresses in telnet test or those written
>> >> below?
>> >>
>> >> -- 
>> >> Regards,
>> >> Sasa Milovanovic
>> >> MCSE:Messaging
>> >> sasa.milovanovic(at)exchangemaster.net
>> >>
>> >> "Eric"  wrote in message
>> >> news:D3AA726C-33E1-43AB-B94C-8FF1635C132F@microsoft.com...
>> >> > Hi Sasa,
>> >> >
>> >> > Pls. ignore the earlier my reply.
>> >> >
>> >> > Following the  details of the telnet,
>> >> >
>> >> > 220 myserver.mydomain Microsoft ESMTP MAIL Service, Version: 
>> >> > 6.0.3790
>> >> > .1830 ready at  Wed, 31 Aug 2005 14:47:16 -0400
>> >> > helo
>> >> > 250 myserver.mydomain Hello [192.168.1.41]
>> >> > mail from: abc@mydomain
>> >> > 250 2.1.0 abc@mydomain....Sender OK
>> >> > rcpt to: xyz@mydomain
>> >> > 250 2.1.5 xyz@mydomain
>> >> > data
>> >> > 354 Start mail input; end with <CRLF>.<CRLF>
>> >> > test msg.
>> >> > thanks
>> >> > .
>> >> > 250 2.6.0 <myserveru11VX00000002@myserver.mydomain> Queued mail
>> >> > for delivery
>> >> > quit
>> >> > 221 2.0.0 myserver.mydomain Service closing transmission channel
>> >> >
>> >> > Also I ena
>> >> > Also I received a NDR as follows,
>> >> > the email account does not exist at the organization this message 
>> >> > was
>> >> > sent
>> >> > to. check the emai address or contact the receipient directly to 
>> >> > find
>> >> > out
>> >> > the
>> >> > correct address.
>> >> > <myservername.mydomain#5.1.1>
>> >> >
>> >> > I enabled the MS exchange transport protocol at the diagnostic 
>> >> > logging
>> >> > of
>> >> > new server and getting a warning application event viwer ID 4006
>> >> >
>> >> > -- 
>> >> > Eric
>> >> >
>> >> >
>> >> > "Sasa Milovanovic" wrote:
>> >> >
>> >> >> Do you get NDR?
>> >> >> Try to send email manually from Ex2003 to Ex2000 box.
>> >> >> telnet "Exch2000BoxName" 25
>> >> >> helo
>> >> >> mail from:
>> >> >> rcpt to:
>> >> >> data
>> >> >> ..
>> >> >>
>> >> >> Let us know what happens!
>> >> >>
>> >> >> -- 
>> >> >> Regards,
>> >> >> Sasa Milovanovic
>> >> >> MCSE:Messaging
>> >> >> sasa.milovanovic(at)exchangemaster.net
>> >> >>
>> >> >> "Eric"  wrote in message
>> >> >> news:521E3D3E-396C-4211-A4D7-E5A8C839D5D0@microsoft.com...
>> >> >> > Hi everyone,
>> >> >> >
>> >> >> > I have a Exchange 2000 std with windows 2000 running on Windows 
>> >> >> > 2003
>> >> >> > AD
>> >> >> > I have added a new HW with windows 2003 in to my existing 2003 
>> >> >> > AD.
>> >> >> > Installed
>> >> >> > the exchange 2003 and done the replication. For testing purpose
>> >> >> > before
>> >> >> > moving
>> >> >> > all the mail boxes I moved two mail boxes to test send and 
>> >> >> > receive,
>> >> >> > internally send and receive  between the two mail boxes in the 
>> >> >> > new
>> >> >> > server
>> >> >> > works fine as well as the internal send and recive between the 
>> >> >> > the
>> >> >> > mail
>> >> >> > boxes
>> >> >> > in the existing exchange 2000 works well. Also external mail
>> >> >> > send/receive
>> >> >> > works with both servers, but when I send internal mail from 
>> >> >> > exchange
>> >> >> > 2000
>> >> >> > to
>> >> >> > exchange 2003 mail box, it's works fine as well but when I send
>> >> >> > internally
>> >> >> > from the exchange 2003 new server mail box to the exchange 2000
>> >> >> > server
>> >> >> > mail
>> >> >> > box, it's not working. I donot have any error logs in the event
>> >> >> > viewer
>> >> >> > even
>> >> >> > though after I enabled the dignostic logging. But I can see the
>> >> >> > mails
>> >> >> > send
>> >> >> > from one server to another stayed in the SMTP queue. Is that 
>> >> >> > usual?
>> >> >> > If
>> >> >> > not,
>> >> >> >
>> >> >> > Please advice me how I can resolve this issue before moving the 
>> >> >> > mail
>> >> >> > boxes
>> >> >> > and bring down the exchange 2000 server.
>> >> >> >
>> >> >> > Thank you
>> >> >> >
>> >> >> > -- 
>> >> >> > Eric
>> >> >>
>> >> >>
>> >> >>
>> >>
>> >>
>> >>
>>
>>
>>

Hi Sasa,

Yes I do have a smart host name entered, In the exchange 2000 there is an 
option to select that attempt to send direct delivery, but in 2003 there is 
no options. And also I haven't set a SMTP connecter since the KB says it not 
required. What is your suggestion.

Thanks


-- 
Eric


"Sasa Milovanovic" wrote:

> Nop, messages between Exchange servers are transfered thru SMTP.
> Exchange Master server just takes care about link state table so it should 
> not cause any problems.
> 
> Are you maybe using smart host?
> 
> 
> -- 
> Regards,
> Sasa Milovanovic
> MCSE:Messaging
> sasa.milovanovic(at)exchangemaster.net
> 
> 
> "Eric"  wrote in message 
> news:1FAE3453-BA89-4C5D-BEBD-FF8E2007E9C9@microsoft.com...
> > Hi Sasa,
> >
> > I don't understand since it is a internal mail why is it looking for smtp.
> > Should be x.400 isn't it? How can I track where this problem occur? I
> > compared all the settings with exchange 2000 and match perfectly ok,
> > including security to the mail boxes plus storage groups. In my routing
> > groups  members the exchange 2003 is master and the ex2000 is member is 
> > that
> > OK?
> >
> > pls. advice
> >
> > -- 
> > Eric
> >
> >
> > "Sasa Milovanovic" wrote:
> >
> >> Some common reasons for 4006 Warning event include the following:
> >>   a.. The connection was dropped by the remote host.
> >>
> >>   b.. The remote SMTP service rejected AUTH negotiation.
> >>
> >>   c.. The server trying to deliver the message cannot access the message
> >> delivery information in the message.
> >>
> >>   d.. An SMTP protocol error occurred.
> >>
> >>   e.. The server that is trying to deliver the message cannot connect to 
> >> the
> >> remote server.
> >>
> >>   f.. If a smart host has been specified in the properties of the SMTP
> >> virtual server, this event can be logged if the smart host is unreachable
> >> for any reason.
> >>
> >> Note   This event can also be logged when the Mail Host Filtering feature 
> >> of
> >> Sybari Antigen Antivirus Software is enabled. Disabling that feature may
> >> resolve this issue
> >>
> >>
> >> -- 
> >> Regards,
> >> Sasa Milovanovic
> >> MCSE:Messaging
> >> sasa.milovanovic(at)exchangemaster.net
> >>
> >> "Eric"  wrote in message
> >> news:59A2BB22-56EE-4ABA-B9FE-BDC5967A97ED@microsoft.com...
> >> > Hi sasa,
> >> >
> >> > I tested with the existing active e-mail addresses
> >> >
> >> > thanks
> >> >
> >> > -- 
> >> > Eric
> >> >
> >> >
> >> > "Sasa Milovanovic" wrote:
> >> >
> >> >> Have you used existing email addresses in telnet test or those written
> >> >> below?
> >> >>
> >> >> -- 
> >> >> Regards,
> >> >> Sasa Milovanovic
> >> >> MCSE:Messaging
> >> >> sasa.milovanovic(at)exchangemaster.net
> >> >>
> >> >> "Eric"  wrote in message
> >> >> news:D3AA726C-33E1-43AB-B94C-8FF1635C132F@microsoft.com...
> >> >> > Hi Sasa,
> >> >> >
> >> >> > Pls. ignore the earlier my reply.
> >> >> >
> >> >> > Following the  details of the telnet,
> >> >> >
> >> >> > 220 myserver.mydomain Microsoft ESMTP MAIL Service, Version: 
> >> >> > 6.0.3790
> >> >> > .1830 ready at  Wed, 31 Aug 2005 14:47:16 -0400
> >> >> > helo
> >> >> > 250 myserver.mydomain Hello [192.168.1.41]
> >> >> > mail from: abc@mydomain
> >> >> > 250 2.1.0 abc@mydomain....Sender OK
> >> >> > rcpt to: xyz@mydomain
> >> >> > 250 2.1.5 xyz@mydomain
> >> >> > data
> >> >> > 354 Start mail input; end with <CRLF>.<CRLF>
> >> >> > test msg.
> >> >> > thanks
> >> >> > .
> >> >> > 250 2.6.0 <myserveru11VX00000002@myserver.mydomain> Queued mail
> >> >> > for delivery
> >> >> > quit
> >> >> > 221 2.0.0 myserver.mydomain Service closing transmission channel
> >> >> >
> >> >> > Also I ena
> >> >> > Also I received a NDR as follows,
> >> >> > the email account does not exist at the organization this message 
> >> >> > was
> >> >> > sent
> >> >> > to. check the emai address or contact the receipient directly to 
> >> >> > find
> >> >> > out
> >> >> > the
> >> >> > correct address.
> >> >> > <myservername.mydomain#5.1.1>
> >> >> >
> >> >> > I enabled the MS exchange transport protocol at the diagnostic 
> >> >> > logging
> >> >> > of
> >> >> > new server and getting a warning application event viwer ID 4006
> >> >> >
> >> >> > -- 
> >> >> > Eric
> >> >> >
> >> >> >
> >> >> > "Sasa Milovanovic" wrote:
> >> >> >
> >> >> >> Do you get NDR?
> >> >> >> Try to send email manually from Ex2003 to Ex2000 box.
> >> >> >> telnet "Exch2000BoxName" 25
> >> >> >> helo
> >> >> >> mail from:
> >> >> >> rcpt to:
> >> >> >> data
> >> >> >> ..
> >> >> >>
> >> >> >> Let us know what happens!
> >> >> >>
> >> >> >> -- 
> >> >> >> Regards,
> >> >> >> Sasa Milovanovic
> >> >> >> MCSE:Messaging
> >> >> >> sasa.milovanovic(at)exchangemaster.net
> >> >> >>
> >> >> >> "Eric"  wrote in message
> >> >> >> news:521E3D3E-396C-4211-A4D7-E5A8C839D5D0@microsoft.com...
> >> >> >> > Hi everyone,
> >> >> >> >
> >> >> >> > I have a Exchange 2000 std with windows 2000 running on Windows 
> >> >> >> > 2003
> >> >> >> > AD
> >> >> >> > I have added a new HW with windows 2003 in to my existing 2003 
> >> >> >> > AD.
> >> >> >> > Installed
> >> >> >> > the exchange 2003 and done the replication. For testing purpose
> >> >> >> > before
> >> >> >> > moving
> >> >> >> > all the mail boxes I moved two mail boxes to test send and 
> >> >> >> > receive,
> >> >> >> > internally send and receive  between the two mail boxes in the 
> >> >> >> > new
> >> >> >> > server
> >> >> >> > works fine as well as the internal send and recive between the 
> >> >> >> > the
> >> >> >> > mail
> >> >> >> > boxes
> >> >> >> > in the existing exchange 2000 works well. Also external mail
> >> >> >> > send/receive
> >> >> >> > works with both servers, but when I send internal mail from 
> >> >> >> > exchange
> >> >> >> > 2000
> >> >> >> > to
> >> >> >> > exchange 2003 mail box, it's works fine as well but when I send
> >> >> >> > internally
> >> >> >> > from the exchange 2003 new server mail box to the exchange 2000
> >> >> >> > server
> >> >> >> > mail
> >> >> >> > box, it's not working. I donot have any error logs in the event
> >> >> >> > viewer
> >> >> >> > even
> >> >> >> > though after I enabled the dignostic logging. But I can see the
> >> >> >> > mails
> >> >> >> > send
> >> >> >> > from one server to another stayed in the SMTP queue. Is that 
> >> >> >> > usual?
> >> >> >> > If
> >> >> >> > not,
> >> >> >> >
> >> >> >> > Please advice me how I can resolve this issue before moving the 
> >> >> >> > mail
> >> >> >> > boxes
> >> >> >> > and bring down the exchange 2000 server.
> >> >> >> >
> >> >> >> > Thank you
> >> >> >> >
> >> >> >> > -- 
> >> >> >> > Eric
> >> >> >>
> >> >> >>
> >> >> >>
> >> >>
> >> >>
> >> >>
> >>
> >>
> >> 
> 
> 
>

Hi Sasa,

After your latest mail, I checked the help for the smart host and as per 
that I removed the smart host and only left the External DNS IP, and now that 
works fine. Thank for all your help and advice. I really appreciate that.

Finally before ending this discussion, I need some advice which may help me 
to complete this migration. Next step I am going to move mail boxes within 
another few days by about 10 mailboxes per day( my total mail box storage 
size is about 13GB) after that I will wait for few days to see any problem 
with send/receive. If every thing works I will stop the IIS 
admin(FTP,NNTP,SMTP and www) and see still the exchange 2000 is working well. 
If everything works well the I will uninstall the Exchange server from ex2000 
and bring down the exc2000. That is my plan. Please add any advice If any one 
thing I should consider when this process happen.

Again thanks you all guys for your help.

Eric


"Sasa Milovanovic" wrote:

> Nop, messages between Exchange servers are transfered thru SMTP.
> Exchange Master server just takes care about link state table so it should 
> not cause any problems.
> 
> Are you maybe using smart host?
> 
> 
> -- 
> Regards,
> Sasa Milovanovic
> MCSE:Messaging
> sasa.milovanovic(at)exchangemaster.net
> 
> 
> "Eric"  wrote in message 
> news:1FAE3453-BA89-4C5D-BEBD-FF8E2007E9C9@microsoft.com...
> > Hi Sasa,
> >
> > I don't understand since it is a internal mail why is it looking for smtp.
> > Should be x.400 isn't it? How can I track where this problem occur? I
> > compared all the settings with exchange 2000 and match perfectly ok,
> > including security to the mail boxes plus storage groups. In my routing
> > groups  members the exchange 2003 is master and the ex2000 is member is 
> > that
> > OK?
> >
> > pls. advice
> >
> > -- 
> > Eric
> >
> >
> > "Sasa Milovanovic" wrote:
> >
> >> Some common reasons for 4006 Warning event include the following:
> >>   a.. The connection was dropped by the remote host.
> >>
> >>   b.. The remote SMTP service rejected AUTH negotiation.
> >>
> >>   c.. The server trying to deliver the message cannot access the message
> >> delivery information in the message.
> >>
> >>   d.. An SMTP protocol error occurred.
> >>
> >>   e.. The server that is trying to deliver the message cannot connect to 
> >> the
> >> remote server.
> >>
> >>   f.. If a smart host has been specified in the properties of the SMTP
> >> virtual server, this event can be logged if the smart host is unreachable
> >> for any reason.
> >>
> >> Note   This event can also be logged when the Mail Host Filtering feature 
> >> of
> >> Sybari Antigen Antivirus Software is enabled. Disabling that feature may
> >> resolve this issue
> >>
> >>
> >> -- 
> >> Regards,
> >> Sasa Milovanovic
> >> MCSE:Messaging
> >> sasa.milovanovic(at)exchangemaster.net
> >>
> >> "Eric"  wrote in message
> >> news:59A2BB22-56EE-4ABA-B9FE-BDC5967A97ED@microsoft.com...
> >> > Hi sasa,
> >> >
> >> > I tested with the existing active e-mail addresses
> >> >
> >> > thanks
> >> >
> >> > -- 
> >> > Eric
> >> >
> >> >
> >> > "Sasa Milovanovic" wrote:
> >> >
> >> >> Have you used existing email addresses in telnet test or those written
> >> >> below?
> >> >>
> >> >> -- 
> >> >> Regards,
> >> >> Sasa Milovanovic
> >> >> MCSE:Messaging
> >> >> sasa.milovanovic(at)exchangemaster.net
> >> >>
> >> >> "Eric"  wrote in message
> >> >> news:D3AA726C-33E1-43AB-B94C-8FF1635C132F@microsoft.com...
> >> >> > Hi Sasa,
> >> >> >
> >> >> > Pls. ignore the earlier my reply.
> >> >> >
> >> >> > Following the  details of the telnet,
> >> >> >
> >> >> > 220 myserver.mydomain Microsoft ESMTP MAIL Service, Version: 
> >> >> > 6.0.3790
> >> >> > .1830 ready at  Wed, 31 Aug 2005 14:47:16 -0400
> >> >> > helo
> >> >> > 250 myserver.mydomain Hello [192.168.1.41]
> >> >> > mail from: abc@mydomain
> >> >> > 250 2.1.0 abc@mydomain....Sender OK
> >> >> > rcpt to: xyz@mydomain
> >> >> > 250 2.1.5 xyz@mydomain
> >> >> > data
> >> >> > 354 Start mail input; end with <CRLF>.<CRLF>
> >> >> > test msg.
> >> >> > thanks
> >> >> > .
> >> >> > 250 2.6.0 <myserveru11VX00000002@myserver.mydomain> Queued mail
> >> >> > for delivery
> >> >> > quit
> >> >> > 221 2.0.0 myserver.mydomain Service closing transmission channel
> >> >> >
> >> >> > Also I ena
> >> >> > Also I received a NDR as follows,
> >> >> > the email account does not exist at the organization this message 
> >> >> > was
> >> >> > sent
> >> >> > to. check the emai address or contact the receipient directly to 
> >> >> > find
> >> >> > out
> >> >> > the
> >> >> > correct address.
> >> >> > <myservername.mydomain#5.1.1>
> >> >> >
> >> >> > I enabled the MS exchange transport protocol at the diagnostic 
> >> >> > logging
> >> >> > of
> >> >> > new server and getting a warning application event viwer ID 4006
> >> >> >
> >> >> > -- 
> >> >> > Eric
> >> >> >
> >> >> >
> >> >> > "Sasa Milovanovic" wrote:
> >> >> >
> >> >> >> Do you get NDR?
> >> >> >> Try to send email manually from Ex2003 to Ex2000 box.
> >> >> >> telnet "Exch2000BoxName" 25
> >> >> >> helo
> >> >> >> mail from:
> >> >> >> rcpt to:
> >> >> >> data
> >> >> >> ..
> >> >> >>
> >> >> >> Let us know what happens!
> >> >> >>
> >> >> >> -- 
> >> >> >> Regards,
> >> >> >> Sasa Milovanovic
> >> >> >> MCSE:Messaging
> >> >> >> sasa.milovanovic(at)exchangemaster.net
> >> >> >>
> >> >> >> "Eric"  wrote in message
> >> >> >> news:521E3D3E-396C-4211-A4D7-E5A8C839D5D0@microsoft.com...
> >> >> >> > Hi everyone,
> >> >> >> >
> >> >> >> > I have a Exchange 2000 std with windows 2000 running on Windows 
> >> >> >> > 2003
> >> >> >> > AD
> >> >> >> > I have added a new HW with windows 2003 in to my existing 2003 
> >> >> >> > AD.
> >> >> >> > Installed
> >> >> >> > the exchange 2003 and done the replication. For testing purpose
> >> >> >> > before
> >> >> >> > moving
> >> >> >> > all the mail boxes I moved two mail boxes to test send and 
> >> >> >> > receive,
> >> >> >> > internally send and receive  between the two mail boxes in the 
> >> >> >> > new
> >> >> >> > server
> >> >> >> > works fine as well as the internal send and recive between the 
> >> >> >> > the
> >> >> >> > mail
> >> >> >> > boxes
> >> >> >> > in the existing exchange 2000 works well. Also external mail
> >> >> >> > send/receive
> >> >> >> > works with both servers, but when I send internal mail from 
> >> >> >> > exchange
> >> >> >> > 2000
> >> >> >> > to
> >> >> >> > exchange 2003 mail box, it's works fine as well but when I send
> >> >> >> > internally
> >> >> >> > from the exchange 2003 new server mail box to the exchange 2000
> >> >> >> > server
> >> >> >> > mail
> >> >> >> > box, it's not working. I donot have any error logs in the event
> >> >> >> > viewer
> >> >> >> > even
> >> >> >> > though after I enabled the dignostic logging. But I can see the
> >> >> >> > mails
> >> >> >> > send
> >> >> >> > from one server to another stayed in the SMTP queue. Is that 
> >> >> >> > usual?
> >> >> >> > If
> >> >> >> > not,
> >> >> >> >
> >> >> >> > Please advice me how I can resolve this issue before moving the 
> >> >> >> > mail
> >> >> >> > boxes
> >> >> >> > and bring down the exchange 2000 server.
> >> >> >> >
> >> >> >> > Thank you
> >> >> >> >
> >> >> >> > -- 
> >> >> >> > Eric
> >> >> >>
> >> >> >>
> >> >> >>
> >> >>
> >> >>
> >> >>
> >>
> >>
> >> 
> 
> 
>

Eric,

just follow instructions in this article
http://support.microsoft.com/?kbid=307917

-- 
Regards,
Sasa Milovanovic
MCSE:Messaging
sasa.milovanovic(at)exchangemaster.net


"Eric"  wrote in message 
news:09FE5B45-F300-4BF3-AEC9-FE2160118E31@microsoft.com...
> Hi Sasa,
>
> After your latest mail, I checked the help for the smart host and as per
> that I removed the smart host and only left the External DNS IP, and now 
> that
> works fine. Thank for all your help and advice. I really appreciate that.
>
> Finally before ending this discussion, I need some advice which may help 
> me
> to complete this migration. Next step I am going to move mail boxes within
> another few days by about 10 mailboxes per day( my total mail box storage
> size is about 13GB) after that I will wait for few days to see any problem
> with send/receive. If every thing works I will stop the IIS
> admin(FTP,NNTP,SMTP and www) and see still the exchange 2000 is working 
> well.
> If everything works well the I will uninstall the Exchange server from 
> ex2000
> and bring down the exc2000. That is my plan. Please add any advice If any 
> one
> thing I should consider when this process happen.
>
> Again thanks you all guys for your help.
>
> Eric
>
>
> "Sasa Milovanovic" wrote:
>
>> Nop, messages between Exchange servers are transfered thru SMTP.
>> Exchange Master server just takes care about link state table so it 
>> should
>> not cause any problems.
>>
>> Are you maybe using smart host?
>>
>>
>> -- 
>> Regards,
>> Sasa Milovanovic
>> MCSE:Messaging
>> sasa.milovanovic(at)exchangemaster.net
>>
>>
>> "Eric"  wrote in message
>> news:1FAE3453-BA89-4C5D-BEBD-FF8E2007E9C9@microsoft.com...
>> > Hi Sasa,
>> >
>> > I don't understand since it is a internal mail why is it looking for 
>> > smtp.
>> > Should be x.400 isn't it? How can I track where this problem occur? I
>> > compared all the settings with exchange 2000 and match perfectly ok,
>> > including security to the mail boxes plus storage groups. In my routing
>> > groups  members the exchange 2003 is master and the ex2000 is member is
>> > that
>> > OK?
>> >
>> > pls. advice
>> >
>> > -- 
>> > Eric
>> >
>> >
>> > "Sasa Milovanovic" wrote:
>> >
>> >> Some common reasons for 4006 Warning event include the following:
>> >>   a.. The connection was dropped by the remote host.
>> >>
>> >>   b.. The remote SMTP service rejected AUTH negotiation.
>> >>
>> >>   c.. The server trying to deliver the message cannot access the 
>> >> message
>> >> delivery information in the message.
>> >>
>> >>   d.. An SMTP protocol error occurred.
>> >>
>> >>   e.. The server that is trying to deliver the message cannot connect 
>> >> to
>> >> the
>> >> remote server.
>> >>
>> >>   f.. If a smart host has been specified in the properties of the SMTP
>> >> virtual server, this event can be logged if the smart host is 
>> >> unreachable
>> >> for any reason.
>> >>
>> >> Note   This event can also be logged when the Mail Host Filtering 
>> >> feature
>> >> of
>> >> Sybari Antigen Antivirus Software is enabled. Disabling that feature 
>> >> may
>> >> resolve this issue
>> >>
>> >>
>> >> -- 
>> >> Regards,
>> >> Sasa Milovanovic
>> >> MCSE:Messaging
>> >> sasa.milovanovic(at)exchangemaster.net
>> >>
>> >> "Eric"  wrote in message
>> >> news:59A2BB22-56EE-4ABA-B9FE-BDC5967A97ED@microsoft.com...
>> >> > Hi sasa,
>> >> >
>> >> > I tested with the existing active e-mail addresses
>> >> >
>> >> > thanks
>> >> >
>> >> > -- 
>> >> > Eric
>> >> >
>> >> >
>> >> > "Sasa Milovanovic" wrote:
>> >> >
>> >> >> Have you used existing email addresses in telnet test or those 
>> >> >> written
>> >> >> below?
>> >> >>
>> >> >> -- 
>> >> >> Regards,
>> >> >> Sasa Milovanovic
>> >> >> MCSE:Messaging
>> >> >> sasa.milovanovic(at)exchangemaster.net
>> >> >>
>> >> >> "Eric"  wrote in message
>> >> >> news:D3AA726C-33E1-43AB-B94C-8FF1635C132F@microsoft.com...
>> >> >> > Hi Sasa,
>> >> >> >
>> >> >> > Pls. ignore the earlier my reply.
>> >> >> >
>> >> >> > Following the  details of the telnet,
>> >> >> >
>> >> >> > 220 myserver.mydomain Microsoft ESMTP MAIL Service, Version:
>> >> >> > 6.0.3790
>> >> >> > .1830 ready at  Wed, 31 Aug 2005 14:47:16 -0400
>> >> >> > helo
>> >> >> > 250 myserver.mydomain Hello [192.168.1.41]
>> >> >> > mail from: abc@mydomain
>> >> >> > 250 2.1.0 abc@mydomain....Sender OK
>> >> >> > rcpt to: xyz@mydomain
>> >> >> > 250 2.1.5 xyz@mydomain
>> >> >> > data
>> >> >> > 354 Start mail input; end with <CRLF>.<CRLF>
>> >> >> > test msg.
>> >> >> > thanks
>> >> >> > .
>> >> >> > 250 2.6.0 <myserveru11VX00000002@myserver.mydomain> Queued mail
>> >> >> > for delivery
>> >> >> > quit
>> >> >> > 221 2.0.0 myserver.mydomain Service closing transmission channel
>> >> >> >
>> >> >> > Also I ena
>> >> >> > Also I received a NDR as follows,
>> >> >> > the email account does not exist at the organization this message
>> >> >> > was
>> >> >> > sent
>> >> >> > to. check the emai address or contact the receipient directly to
>> >> >> > find
>> >> >> > out
>> >> >> > the
>> >> >> > correct address.
>> >> >> > <myservername.mydomain#5.1.1>
>> >> >> >
>> >> >> > I enabled the MS exchange transport protocol at the diagnostic
>> >> >> > logging
>> >> >> > of
>> >> >> > new server and getting a warning application event viwer ID 4006
>> >> >> >
>> >> >> > -- 
>> >> >> > Eric
>> >> >> >
>> >> >> >
>> >> >> > "Sasa Milovanovic" wrote:
>> >> >> >
>> >> >> >> Do you get NDR?
>> >> >> >> Try to send email manually from Ex2003 to Ex2000 box.
>> >> >> >> telnet "Exch2000BoxName" 25
>> >> >> >> helo
>> >> >> >> mail from:
>> >> >> >> rcpt to:
>> >> >> >> data
>> >> >> >> ..
>> >> >> >>
>> >> >> >> Let us know what happens!
>> >> >> >>
>> >> >> >> -- 
>> >> >> >> Regards,
>> >> >> >> Sasa Milovanovic
>> >> >> >> MCSE:Messaging
>> >> >> >> sasa.milovanovic(at)exchangemaster.net
>> >> >> >>
>> >> >> >> "Eric"  wrote in message
>> >> >> >> news:521E3D3E-396C-4211-A4D7-E5A8C839D5D0@microsoft.com...
>> >> >> >> > Hi everyone,
>> >> >> >> >
>> >> >> >> > I have a Exchange 2000 std with windows 2000 running on 
>> >> >> >> > Windows
>> >> >> >> > 2003
>> >> >> >> > AD
>> >> >> >> > I have added a new HW with windows 2003 in to my existing 2003
>> >> >> >> > AD.
>> >> >> >> > Installed
>> >> >> >> > the exchange 2003 and done the replication. For testing 
>> >> >> >> > purpose
>> >> >> >> > before
>> >> >> >> > moving
>> >> >> >> > all the mail boxes I moved two mail boxes to test send and
>> >> >> >> > receive,
>> >> >> >> > internally send and receive  between the two mail boxes in the
>> >> >> >> > new
>> >> >> >> > server
>> >> >> >> > works fine as well as the internal send and recive between the
>> >> >> >> > the
>> >> >> >> > mail
>> >> >> >> > boxes
>> >> >> >> > in the existing exchange 2000 works well. Also external mail
>> >> >> >> > send/receive
>> >> >> >> > works with both servers, but when I send internal mail from
>> >> >> >> > exchange
>> >> >> >> > 2000
>> >> >> >> > to
>> >> >> >> > exchange 2003 mail box, it's works fine as well but when I 
>> >> >> >> > send
>> >> >> >> > internally
>> >> >> >> > from the exchange 2003 new server mail box to the exchange 
>> >> >> >> > 2000
>> >> >> >> > server
>> >> >> >> > mail
>> >> >> >> > box, it's not working. I donot have any error logs in the 
>> >> >> >> > event
>> >> >> >> > viewer
>> >> >> >> > even
>> >> >> >> > though after I enabled the dignostic logging. But I can see 
>> >> >> >> > the
>> >> >> >> > mails
>> >> >> >> > send
>> >> >> >> > from one server to another stayed in the SMTP queue. Is that
>> >> >> >> > usual?
>> >> >> >> > If
>> >> >> >> > not,
>> >> >> >> >
>> >> >> >> > Please advice me how I can resolve this issue before moving 
>> >> >> >> > the
>> >> >> >> > mail
>> >> >> >> > boxes
>> >> >> >> > and bring down the exchange 2000 server.
>> >> >> >> >
>> >> >> >> > Thank you
>> >> >> >> >
>> >> >> >> > -- 
>> >> >> >> > Eric
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >>
>> >>
>> >>
>>
>>
>>