|
|
|
date: Tue, 9 Sep 2008 16:00:12 +0800,
group: microsoft.public.exchange.mobility
back
Re: ActiveSync Warning in Exchange 2007
I've seen this issue on and off over the years. I had a Sonic wall at one
point and no matter what you set the timeout at the errors were always
there. These days I see it once in a while. Some days lots, others never.
Anyways, is it actually causing an issue, or just the lame events that
irritate? For me it was always the later.
"Jimmy Singal" wrote in message
news:316C89E7-5B4A-406D-88BA-E69F42DE46F2@microsoft.com...
> Seems there's no one has experience this issue.
> Is there anyone from Microsoft can help?
>
> "Jimmy Singal" wrote in message
> news:A97AABAF-B884-4F9B-8D0E-4A959FFBBBD6@microsoft.com...
>> Dear All,
>>
>> After some users using the iPhone to access the email, we notice the
>> Exchange Server 2007 generate this error:
>>
>> Event Type: Warning
>> Event Source: MSExchange ActiveSync
>> Event Category: Requests
>> Event ID: 1040
>> Date: 9/9/2008
>> Time: 3:44:18 PM
>> User: N/A
>> Computer: ASEFEXCH
>> Description:
>> The average of the most recent [182] heartbeat intervals used by clients
>> is less than or equal to [540].
>> Make sure that your firewall configuration is set to work correctly with
>> Exchange ActiveSync and Direct Push technology. Specifically, make sure
>> that your firewall is configured so that requests to Exchange ActiveSync
>> do not expire before they have the opportunity to be processed.
>>
>> For more information about how to configure firewall settings when you
>> use Exchange ActiveSync, see Microsoft Knowledge Base article 905013,
>> "Enterprise Firewall Configuration for Exchange ActiveSync Direct Push
>> Technology"
>> (http://go.microsoft.com/fwlink/?linkid=3052&kbid=905013).
>>
>> For more information, see Help and Support Center at
>> http://go.microsoft.com/fwlink/events.asp.
>>
>>
>> We have changed the HTTPS timeout value in the firewall from 30 Mins to
>> 60 Mins.
>> But the error still appears.
>> Anyone knows how to solve this? Trying to figure out from KB 905013 not
>> very useful.
>>
>> Thanks in advance,
>>
>> Jim
>>
>
date: Thu, 25 Sep 2008 05:10:21 -0700
author: Martin Blackstone [MVP]
Re: ActiveSync Warning in Exchange 2007
On Sep 25, 8:10 am, "Martin Blackstone [MVP]"
wrote:
> I've seen this issue on and off over the years. I had a Sonic wall at one
> point and no matter what you set the timeout at the errors were always
> there. These days I see it once in a while. Some days lots, others never.
>
> Anyways, is it actually causing an issue, or just the lame events that
> irritate? For me it was always the later.
>
> "Jimmy Singal" wrote in message
>
> news:316C89E7-5B4A-406D-88BA-E69F42DE46F2@microsoft.com...
>
> > Seems there's no one has experience this issue.
> > Is there anyone from Microsoft can help?
>
> > "Jimmy Singal" wrote in message
> >news:A97AABAF-B884-4F9B-8D0E-4A959FFBBBD6@microsoft.com...
> >> Dear All,
>
> >> After some users using the iPhone to access the email, we notice the
> >> Exchange Server 2007 generate this error:
>
> >> Event Type: Warning
> >> Event Source: MSExchange ActiveSync
> >> Event Category: Requests
> >> Event ID: 1040
> >> Date: 9/9/2008
> >> Time: 3:44:18 PM
> >> User: N/A
> >> Computer: ASEFEXCH
> >> Description:
> >> The average of the most recent [182] heartbeat intervals used by clients
> >> is less than or equal to [540].
> >> Make sure that your firewall configuration is set to work correctly with
> >> Exchange ActiveSync and Direct Push technology. Specifically, make sure
> >> that your firewall is configured so that requests to Exchange ActiveSync
> >> do not expire before they have the opportunity to be processed.
>
> >> For more information about how to configure firewall settings when you
> >> use Exchange ActiveSync, see Microsoft Knowledge Base article 905013,
> >> "Enterprise Firewall Configuration for Exchange ActiveSync Direct Push
> >> Technology"
> >> (http://go.microsoft.com/fwlink/?linkid=3052&kbid=905013).
>
> >> For more information, see Help and Support Center at
> >>http://go.microsoft.com/fwlink/events.asp.
>
> >> We have changed the HTTPS timeout value in the firewall from 30 Mins to
> >> 60 Mins.
> >> But the error still appears.
> >> Anyone knows how to solve this? Trying to figure out from KB 905013 not
> >> very useful.
>
> >> Thanks in advance,
>
> >> Jim
For me it is causing an issue with iPhones connection. Apparently it
has to do with the TCP connections max life on the sonic wall. If it
is set too low, it will kill the active sync session and cause issues
on iphones and other active sync devices... I to have a Sonic wall.
And these issues are becoming more and more frustrating to me. As my
iPhones here will connect at one point then wont be able to at others,
with no type of pattern, it will just react like it wants to at any
given time.
I wished someone had the answer, but I have been reading and reading
and researching for days with the same results.
date: Fri, 10 Oct 2008 14:32:57 -0700 (PDT)
author: unknown
Re: ActiveSync Warning in Exchange 2007
Have you talked to Sonicwall?
Its been a while, but seems you could extend the connection timeout
values...
wrote in message
news:155414e0-a017-4f8f-a057-ed94052c1ad1@y29g2000hsf.googlegroups.com...
On Sep 25, 8:10 am, "Martin Blackstone [MVP]"
wrote:
> I've seen this issue on and off over the years. I had a Sonic wall at one
> point and no matter what you set the timeout at the errors were always
> there. These days I see it once in a while. Some days lots, others never.
>
> Anyways, is it actually causing an issue, or just the lame events that
> irritate? For me it was always the later.
>
> "Jimmy Singal" wrote in message
>
> news:316C89E7-5B4A-406D-88BA-E69F42DE46F2@microsoft.com...
>
> > Seems there's no one has experience this issue.
> > Is there anyone from Microsoft can help?
>
> > "Jimmy Singal" wrote in message
> >news:A97AABAF-B884-4F9B-8D0E-4A959FFBBBD6@microsoft.com...
> >> Dear All,
>
> >> After some users using the iPhone to access the email, we notice the
> >> Exchange Server 2007 generate this error:
>
> >> Event Type: Warning
> >> Event Source: MSExchange ActiveSync
> >> Event Category: Requests
> >> Event ID: 1040
> >> Date: 9/9/2008
> >> Time: 3:44:18 PM
> >> User: N/A
> >> Computer: ASEFEXCH
> >> Description:
> >> The average of the most recent [182] heartbeat intervals used by
> >> clients
> >> is less than or equal to [540].
> >> Make sure that your firewall configuration is set to work correctly
> >> with
> >> Exchange ActiveSync and Direct Push technology. Specifically, make sure
> >> that your firewall is configured so that requests to Exchange
> >> ActiveSync
> >> do not expire before they have the opportunity to be processed.
>
> >> For more information about how to configure firewall settings when you
> >> use Exchange ActiveSync, see Microsoft Knowledge Base article 905013,
> >> "Enterprise Firewall Configuration for Exchange ActiveSync Direct Push
> >> Technology"
> >> (http://go.microsoft.com/fwlink/?linkid=3052&kbid=905013).
>
> >> For more information, see Help and Support Center at
> >>http://go.microsoft.com/fwlink/events.asp.
>
> >> We have changed the HTTPS timeout value in the firewall from 30 Mins to
> >> 60 Mins.
> >> But the error still appears.
> >> Anyone knows how to solve this? Trying to figure out from KB 905013 not
> >> very useful.
>
> >> Thanks in advance,
>
> >> Jim
For me it is causing an issue with iPhones connection. Apparently it
has to do with the TCP connections max life on the sonic wall. If it
is set too low, it will kill the active sync session and cause issues
on iphones and other active sync devices... I to have a Sonic wall.
And these issues are becoming more and more frustrating to me. As my
iPhones here will connect at one point then wont be able to at others,
with no type of pattern, it will just react like it wants to at any
given time.
I wished someone had the answer, but I have been reading and reading
and researching for days with the same results.
date: Fri, 10 Oct 2008 14:39:23 -0700
author: Martin Blackstone [MVP]
|
|
