Do I need to install some form of activesync on my exchange 2003 server? I am having a hell of a time getting a treo 700 to sync to the server? If there is a "special" version of activesync where can I download it from. Thanks Paul
No, do you have Exchange SP2 installed on your server? What happens when you sync Treo 700? Have you enabled SSL? What errors? -- John Oliver, Jr MCSE, MCT, CCNA Exchange MVP 2006 Microsoft Certified Partner "Paul" wrote in message news:e2zOwAcdGHA.1320@TK2MSFTNGP04.phx.gbl... > Do I need to install some form of activesync on my exchange 2003 server? I > am having a hell of a time getting a treo 700 to sync to the server? > > If there is a "special" version of activesync where can I download it > from. > > Thanks > Paul >
Hello John I have SP2 installed and SSL is enabled. I have copied the certificate to the Tero. When I go and config the active sync connection for our exchange server I get the following error... "You cannot log on the Microsoft Exchange Server because the security certificate on the server is not valid or expired. Click Retry to change server......" The cert is not expired. I used DER encoded binary x.509 when I exported the cert. I am currently strying to sync to exchange via USB on my laptop. I have done "Method 2" from MS KB 817379 Thanks Paul "John Oliver, Jr. [MVP]" wrote in message news:OKfDL$idGHA.4892@TK2MSFTNGP02.phx.gbl... > No, do you have Exchange SP2 installed on your server? What happens when > you sync Treo 700? Have you enabled SSL? What errors? > > -- > John Oliver, Jr > MCSE, MCT, CCNA > Exchange MVP 2006 > Microsoft Certified Partner > > "Paul" wrote in message > news:e2zOwAcdGHA.1320@TK2MSFTNGP04.phx.gbl... >> Do I need to install some form of activesync on my exchange 2003 server? >> I am having a hell of a time getting a treo 700 to sync to the server? >> >> If there is a "special" version of activesync where can I download it >> from. >> >> Thanks >> Paul >> > >
Check the date on the Treo. If the date is incorect you will get that error. If that doesn't fix it then check and make sure your cert is valid. -- -- Eric Hicks [That_Kid] (MS-MVP Mobile Devices) The MS-MVP Program - http://mvp.support.microsoft.com This posting is provided "AS IS" with no warranties, and confers no rights... "Paul" wrote in message news:eIof41jdGHA.3352@TK2MSFTNGP03.phx.gbl... > Hello John > > I have SP2 installed and SSL is enabled. I have copied the certificate to > the Tero. When I go and config the active sync connection for our exchange > server I get the following error... > > "You cannot log on the Microsoft Exchange Server because the security > certificate on the server is not valid or expired. Click Retry to change > server......" > > The cert is not expired. > I used DER encoded binary x.509 when I exported the cert. > I am currently strying to sync to exchange via USB on my laptop. > I have done "Method 2" from MS KB 817379 > > Thanks > Paul > > > > "John Oliver, Jr. [MVP]" wrote in message > news:OKfDL$idGHA.4892@TK2MSFTNGP02.phx.gbl... >> No, do you have Exchange SP2 installed on your server? What happens when >> you sync Treo 700? Have you enabled SSL? What errors? >> >> -- >> John Oliver, Jr >> MCSE, MCT, CCNA >> Exchange MVP 2006 >> Microsoft Certified Partner >> >> "Paul" wrote in message >> news:e2zOwAcdGHA.1320@TK2MSFTNGP04.phx.gbl... >>> Do I need to install some form of activesync on my exchange 2003 server? >>> I am having a hell of a time getting a treo 700 to sync to the server? >>> >>> If there is a "special" version of activesync where can I download it >>> from. >>> >>> Thanks >>> Paul >>> >> >> > >
Time is correct. How do you check to see if a cert is valid? The cert is good until 2008. The cert is one I created in exchange. Thanks "Eric Hicks [MVP]" <i'm@home.with.u> wrote in message news:uGzxMukdGHA.1456@TK2MSFTNGP04.phx.gbl... > Check the date on the Treo. If the date is incorect you will get that > error. If that doesn't fix it then check and make sure your cert is > valid. > > -- > -- > Eric Hicks [That_Kid] (MS-MVP Mobile Devices) > > The MS-MVP Program - http://mvp.support.microsoft.com > This posting is provided "AS IS" with no warranties, and confers no > rights... > > "Paul" wrote in message > news:eIof41jdGHA.3352@TK2MSFTNGP03.phx.gbl... >> Hello John >> >> I have SP2 installed and SSL is enabled. I have copied the certificate to >> the Tero. When I go and config the active sync connection for our >> exchange server I get the following error... >> >> "You cannot log on the Microsoft Exchange Server because the security >> certificate on the server is not valid or expired. Click Retry to change >> server......" >> >> The cert is not expired. >> I used DER encoded binary x.509 when I exported the cert. >> I am currently strying to sync to exchange via USB on my laptop. >> I have done "Method 2" from MS KB 817379 >> >> Thanks >> Paul >> >> >> >> "John Oliver, Jr. [MVP]" wrote in message >> news:OKfDL$idGHA.4892@TK2MSFTNGP02.phx.gbl... >>> No, do you have Exchange SP2 installed on your server? What happens >>> when you sync Treo 700? Have you enabled SSL? What errors? >>> >>> -- >>> John Oliver, Jr >>> MCSE, MCT, CCNA >>> Exchange MVP 2006 >>> Microsoft Certified Partner >>> >>> "Paul" wrote in message >>> news:e2zOwAcdGHA.1320@TK2MSFTNGP04.phx.gbl... >>>> Do I need to install some form of activesync on my exchange 2003 >>>> server? I am having a hell of a time getting a treo 700 to sync to the >>>> server? >>>> >>>> If there is a "special" version of activesync where can I download it >>>> from. >>>> >>>> Thanks >>>> Paul >>>> >>> >>> >> >> > >
One way is to access OWA from the device and see if you're prompted to accept the certificate or if you're presented with any. -- -- Eric Hicks [That_Kid] (MS-MVP Mobile Devices) The MS-MVP Program - http://mvp.support.microsoft.com This posting is provided "AS IS" with no warranties, and confers no rights... "Paul" wrote in message news:OdmXc6ndGHA.3900@TK2MSFTNGP05.phx.gbl... > Time is correct. > How do you check to see if a cert is valid? > The cert is good until 2008. The cert is one I created in exchange. > > Thanks > > "Eric Hicks [MVP]" <i'm@home.with.u> wrote in message > news:uGzxMukdGHA.1456@TK2MSFTNGP04.phx.gbl... >> Check the date on the Treo. If the date is incorect you will get that >> error. If that doesn't fix it then check and make sure your cert is >> valid. >> >> -- >> -- >> Eric Hicks [That_Kid] (MS-MVP Mobile Devices) >> >> The MS-MVP Program - http://mvp.support.microsoft.com >> This posting is provided "AS IS" with no warranties, and confers no >> rights... >> >> "Paul" wrote in message >> news:eIof41jdGHA.3352@TK2MSFTNGP03.phx.gbl... >>> Hello John >>> >>> I have SP2 installed and SSL is enabled. I have copied the certificate >>> to the Tero. When I go and config the active sync connection for our >>> exchange server I get the following error... >>> >>> "You cannot log on the Microsoft Exchange Server because the security >>> certificate on the server is not valid or expired. Click Retry to change >>> server......" >>> >>> The cert is not expired. >>> I used DER encoded binary x.509 when I exported the cert. >>> I am currently strying to sync to exchange via USB on my laptop. >>> I have done "Method 2" from MS KB 817379 >>> >>> Thanks >>> Paul >>> >>> >>> >>> "John Oliver, Jr. [MVP]" wrote in message >>> news:OKfDL$idGHA.4892@TK2MSFTNGP02.phx.gbl... >>>> No, do you have Exchange SP2 installed on your server? What happens >>>> when you sync Treo 700? Have you enabled SSL? What errors? >>>> >>>> -- >>>> John Oliver, Jr >>>> MCSE, MCT, CCNA >>>> Exchange MVP 2006 >>>> Microsoft Certified Partner >>>> >>>> "Paul" wrote in message >>>> news:e2zOwAcdGHA.1320@TK2MSFTNGP04.phx.gbl... >>>>> Do I need to install some form of activesync on my exchange 2003 >>>>> server? I am having a hell of a time getting a treo 700 to sync to the >>>>> server? >>>>> >>>>> If there is a "special" version of activesync where can I download it >>>>> from. >>>>> >>>>> Thanks >>>>> Paul >>>>> >>>> >>>> >>> >>> >> >> > >
Hi I had similar problems with our own MS Certification. I copied my untrusted Cert as a File to the TREO. On the TREO you browse to the Cert and double click on it to import it to the trusted Certs. After that it worked without a problem. Cheers Roman "Eric Hicks [MVP]" <i'm@home.with.u> wrote in message news:%23X%23hD$CeGHA.1276@TK2MSFTNGP03.phx.gbl... > One way is to access OWA from the device and see if you're prompted to > accept the certificate or if you're presented with any. > > -- > -- > Eric Hicks [That_Kid] (MS-MVP Mobile Devices) > > The MS-MVP Program - http://mvp.support.microsoft.com > This posting is provided "AS IS" with no warranties, and confers no > rights... > > "Paul" wrote in message > news:OdmXc6ndGHA.3900@TK2MSFTNGP05.phx.gbl... >> Time is correct. >> How do you check to see if a cert is valid? >> The cert is good until 2008. The cert is one I created in exchange. >> >> Thanks >> >> "Eric Hicks [MVP]" <i'm@home.with.u> wrote in message >> news:uGzxMukdGHA.1456@TK2MSFTNGP04.phx.gbl... >>> Check the date on the Treo. If the date is incorect you will get that >>> error. If that doesn't fix it then check and make sure your cert is >>> valid. >>> >>> -- >>> -- >>> Eric Hicks [That_Kid] (MS-MVP Mobile Devices) >>> >>> The MS-MVP Program - http://mvp.support.microsoft.com >>> This posting is provided "AS IS" with no warranties, and confers no >>> rights... >>> >>> "Paul" wrote in message >>> news:eIof41jdGHA.3352@TK2MSFTNGP03.phx.gbl... >>>> Hello John >>>> >>>> I have SP2 installed and SSL is enabled. I have copied the certificate >>>> to the Tero. When I go and config the active sync connection for our >>>> exchange server I get the following error... >>>> >>>> "You cannot log on the Microsoft Exchange Server because the security >>>> certificate on the server is not valid or expired. Click Retry to >>>> change server......" >>>> >>>> The cert is not expired. >>>> I used DER encoded binary x.509 when I exported the cert. >>>> I am currently strying to sync to exchange via USB on my laptop. >>>> I have done "Method 2" from MS KB 817379 >>>> >>>> Thanks >>>> Paul >>>> >>>> >>>> >>>> "John Oliver, Jr. [MVP]" wrote in message >>>> news:OKfDL$idGHA.4892@TK2MSFTNGP02.phx.gbl... >>>>> No, do you have Exchange SP2 installed on your server? What happens >>>>> when you sync Treo 700? Have you enabled SSL? What errors? >>>>> >>>>> -- >>>>> John Oliver, Jr >>>>> MCSE, MCT, CCNA >>>>> Exchange MVP 2006 >>>>> Microsoft Certified Partner >>>>> >>>>> "Paul" wrote in message >>>>> news:e2zOwAcdGHA.1320@TK2MSFTNGP04.phx.gbl... >>>>>> Do I need to install some form of activesync on my exchange 2003 >>>>>> server? I am having a hell of a time getting a treo 700 to sync to >>>>>> the server? >>>>>> >>>>>> If there is a "special" version of activesync where can I download it >>>>>> from. >>>>>> >>>>>> Thanks >>>>>> Paul >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > >
