|
|
|
date: Fri, 18 Apr 2008 23:00:16 -0400,
group: microsoft.public.exchange.clustering
back
Re: Windows 2008 Firewall configuration for SCR
I can get to a share on the SCR target from source, since the SCR target is
also the CCR share witness machine... ( in the lab infrastructure, in prod,
it would be a server in another site )....
The only IP conflict I can see is the IPV6 Teredo Tunneling
Pseudo-Interface...
I'm in the process of building a similar system in production environement
and have the same problem with the Teredo interface.
I have changed the regkey :
"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\DisabledCompontents"
to 8, rebooted, but still the same problem...
Please help...
Thanks !!!
--
=
"Bharat Suneja [MSFT]" wrote in message
news:uq3wFGmoIHA.2208@TK2MSFTNGP04.phx.gbl...
> Can you get to a shared folder on the SCR target computer from the SCR
> source? This is to validate you have SMB connectivity.
>
> The error code 0xc7ff1004 refers to an IP address conflict/duplicate IP
> addresses.
> --
> Bharat Suneja
> Microsoft Corporation
> ------------------------
> This posting is provided "AS IS" with no warranties, and confers no
> rights. Please do not send email directly to this alias. This alias is for
> newsgroup purposes only.
>
>
> "Thinkpad21" wrote in message
> news:OrjnCncoIHA.3556@TK2MSFTNGP04.phx.gbl...
>> Hi,
>>
>> I have looked and tried to configure SCR on Windows 2008, but unable to
>> seed...
>>
>> I have looked at the following article :
>> http://technet.microsoft.com/en-us/library/bb691338(EXCHG.80).aspx
>> and http://technet.microsoft.com/en-us/library/bb331973(EXCHG.80).aspx
>>
>> But have tried several different configs, same problem, getting error :
>> Getting the following error :
>> WARNING: Replication for storage group 'EXCH-CCR-MB\SG-Test' is still
>> suspended. If needed, you can use the Resume-StorageGroupCopy cmdlet in
>> the
>> Exchange Management Shell to resume replication.
>>
>> Update-StorageGroupCopy : Seeding failed : Database seeding error: Error
>> return
>> ed from an ESE function call (0xc7ff1004), error code (0x0).
>> At line:1 char:24
>> + Update-StorageGroupCopy <<<< -Identity
>> EXCH-CCR-MB\SG-Test -StandbyMachi
>> ne EXCH-SCR-TARGET
>>
>> Thanks for any help !!!
>> --
>>
>>
>
date: Sat, 19 Apr 2008 22:23:53 -0400
author: Thinkpad21
Re: Windows 2008 Firewall configuration for SCR
I disabled the interface everywhere in device manager, so no more conflicts,
but still the same seeding problem...
--
--
---
Houman Yahyaei ( PMP, CCNA, MCSE, MCT )
IT Training and Consulting
www.formationhy.com
Houman@formationhy.com
"Thinkpad21" wrote in message
news:OXH3F3ooIHA.4292@TK2MSFTNGP04.phx.gbl...
>I can get to a share on the SCR target from source, since the SCR target is
>also the CCR share witness machine... ( in the lab infrastructure, in prod,
>it would be a server in another site )....
>
> The only IP conflict I can see is the IPV6 Teredo Tunneling
> Pseudo-Interface...
>
> I'm in the process of building a similar system in production environement
> and have the same problem with the Teredo interface.
>
> I have changed the regkey :
> "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\DisabledCompontents"
> to 8, rebooted, but still the same problem...
>
> Please help...
>
> Thanks !!!
>
>
> --
> =
> "Bharat Suneja [MSFT]" wrote in message
> news:uq3wFGmoIHA.2208@TK2MSFTNGP04.phx.gbl...
>> Can you get to a shared folder on the SCR target computer from the SCR
>> source? This is to validate you have SMB connectivity.
>>
>> The error code 0xc7ff1004 refers to an IP address conflict/duplicate IP
>> addresses.
>> --
>> Bharat Suneja
>> Microsoft Corporation
>> ------------------------
>> This posting is provided "AS IS" with no warranties, and confers no
>> rights. Please do not send email directly to this alias. This alias is
>> for
>> newsgroup purposes only.
>>
>>
>> "Thinkpad21" wrote in message
>> news:OrjnCncoIHA.3556@TK2MSFTNGP04.phx.gbl...
>>> Hi,
>>>
>>> I have looked and tried to configure SCR on Windows 2008, but unable to
>>> seed...
>>>
>>> I have looked at the following article :
>>> http://technet.microsoft.com/en-us/library/bb691338(EXCHG.80).aspx
>>> and http://technet.microsoft.com/en-us/library/bb331973(EXCHG.80).aspx
>>>
>>> But have tried several different configs, same problem, getting error :
>>> Getting the following error :
>>> WARNING: Replication for storage group 'EXCH-CCR-MB\SG-Test' is still
>>> suspended. If needed, you can use the Resume-StorageGroupCopy cmdlet in
>>> the
>>> Exchange Management Shell to resume replication.
>>>
>>> Update-StorageGroupCopy : Seeding failed : Database seeding error: Error
>>> return
>>> ed from an ESE function call (0xc7ff1004), error code (0x0).
>>> At line:1 char:24
>>> + Update-StorageGroupCopy <<<< -Identity
>>> EXCH-CCR-MB\SG-Test -StandbyMachi
>>> ne EXCH-SCR-TARGET
>>>
>>> Thanks for any help !!!
>>> --
>>>
>>>
>>
>
>
date: Sat, 19 Apr 2008 22:50:05 -0400
author: Thinkpad21
Re: Windows 2008 Firewall configuration for SCR
Have you disabled Windows Firewall on SCR source & target servers?
--
Bharat Suneja
Microsoft Corporation
------------------------
This posting is provided "AS IS" with no warranties, and confers no
rights. Please do not send email directly to this alias. This alias is for
newsgroup purposes only.
"Thinkpad21" wrote in message
news:eSJ8uFpoIHA.4492@TK2MSFTNGP02.phx.gbl...
>I disabled the interface everywhere in device manager, so no more
>conflicts, but still the same seeding problem...
>
> --
> --
> ---
> Houman Yahyaei ( PMP, CCNA, MCSE, MCT )
> IT Training and Consulting
> www.formationhy.com
> Houman@formationhy.com
> "Thinkpad21" wrote in message
> news:OXH3F3ooIHA.4292@TK2MSFTNGP04.phx.gbl...
>>I can get to a share on the SCR target from source, since the SCR target
>>is also the CCR share witness machine... ( in the lab infrastructure, in
>>prod, it would be a server in another site )....
>>
>> The only IP conflict I can see is the IPV6 Teredo Tunneling
>> Pseudo-Interface...
>>
>> I'm in the process of building a similar system in production
>> environement and have the same problem with the Teredo interface.
>>
>> I have changed the regkey :
>> "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\DisabledCompontents"
>> to 8, rebooted, but still the same problem...
>>
>> Please help...
>>
>> Thanks !!!
>>
>>
>> --
>> =
>> "Bharat Suneja [MSFT]" wrote in message
>> news:uq3wFGmoIHA.2208@TK2MSFTNGP04.phx.gbl...
>>> Can you get to a shared folder on the SCR target computer from the SCR
>>> source? This is to validate you have SMB connectivity.
>>>
>>> The error code 0xc7ff1004 refers to an IP address conflict/duplicate IP
>>> addresses.
>>> --
>>> Bharat Suneja
>>> Microsoft Corporation
>>> ------------------------
>>> This posting is provided "AS IS" with no warranties, and confers no
>>> rights. Please do not send email directly to this alias. This alias is
>>> for
>>> newsgroup purposes only.
>>>
>>>
>>> "Thinkpad21" wrote in message
>>> news:OrjnCncoIHA.3556@TK2MSFTNGP04.phx.gbl...
>>>> Hi,
>>>>
>>>> I have looked and tried to configure SCR on Windows 2008, but unable to
>>>> seed...
>>>>
>>>> I have looked at the following article :
>>>> http://technet.microsoft.com/en-us/library/bb691338(EXCHG.80).aspx
>>>> and http://technet.microsoft.com/en-us/library/bb331973(EXCHG.80).aspx
>>>>
>>>> But have tried several different configs, same problem, getting error :
>>>> Getting the following error :
>>>> WARNING: Replication for storage group 'EXCH-CCR-MB\SG-Test' is still
>>>> suspended. If needed, you can use the Resume-StorageGroupCopy cmdlet in
>>>> the
>>>> Exchange Management Shell to resume replication.
>>>>
>>>> Update-StorageGroupCopy : Seeding failed : Database seeding error:
>>>> Error
>>>> return
>>>> ed from an ESE function call (0xc7ff1004), error code (0x0).
>>>> At line:1 char:24
>>>> + Update-StorageGroupCopy <<<< -Identity
>>>> EXCH-CCR-MB\SG-Test -StandbyMachi
>>>> ne EXCH-SCR-TARGET
>>>>
>>>> Thanks for any help !!!
>>>> --
>>>>
>>>>
>>>
>>
>>
>
>
date: Mon, 21 Apr 2008 12:25:00 -0700
author: Bharat Suneja [MSFT]
Re: Windows 2008 Firewall configuration for SCR
Nope... it is running... and I would rather find a way to do it with the
firewall running...
But I will test it... to see if that works, without the firewall...
Thanks !!!
"Bharat Suneja [MSFT]" wrote in message
news:%234DxlV%23oIHA.3556@TK2MSFTNGP04.phx.gbl...
> Have you disabled Windows Firewall on SCR source & target servers?
>
> --
> Bharat Suneja
> Microsoft Corporation
> ------------------------
> This posting is provided "AS IS" with no warranties, and confers no
> rights. Please do not send email directly to this alias. This alias is for
> newsgroup purposes only.
>
>
> "Thinkpad21" wrote in message
> news:eSJ8uFpoIHA.4492@TK2MSFTNGP02.phx.gbl...
>>I disabled the interface everywhere in device manager, so no more
>>conflicts, but still the same seeding problem...
>>
>> --
>> --
>> ---
>> Houman Yahyaei ( PMP, CCNA, MCSE, MCT )
>> IT Training and Consulting
>> www.formationhy.com
>> Houman@formationhy.com
>> "Thinkpad21" wrote in message
>> news:OXH3F3ooIHA.4292@TK2MSFTNGP04.phx.gbl...
>>>I can get to a share on the SCR target from source, since the SCR target
>>>is also the CCR share witness machine... ( in the lab infrastructure, in
>>>prod, it would be a server in another site )....
>>>
>>> The only IP conflict I can see is the IPV6 Teredo Tunneling
>>> Pseudo-Interface...
>>>
>>> I'm in the process of building a similar system in production
>>> environement and have the same problem with the Teredo interface.
>>>
>>> I have changed the regkey :
>>> "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\DisabledCompontents"
>>> to 8, rebooted, but still the same problem...
>>>
>>> Please help...
>>>
>>> Thanks !!!
>>>
>>>
>>> --
>>> =
>>> "Bharat Suneja [MSFT]" wrote in message
>>> news:uq3wFGmoIHA.2208@TK2MSFTNGP04.phx.gbl...
>>>> Can you get to a shared folder on the SCR target computer from the SCR
>>>> source? This is to validate you have SMB connectivity.
>>>>
>>>> The error code 0xc7ff1004 refers to an IP address conflict/duplicate IP
>>>> addresses.
>>>> --
>>>> Bharat Suneja
>>>> Microsoft Corporation
>>>> ------------------------
>>>> This posting is provided "AS IS" with no warranties, and confers no
>>>> rights. Please do not send email directly to this alias. This alias is
>>>> for
>>>> newsgroup purposes only.
>>>>
>>>>
>>>> "Thinkpad21" wrote in message
>>>> news:OrjnCncoIHA.3556@TK2MSFTNGP04.phx.gbl...
>>>>> Hi,
>>>>>
>>>>> I have looked and tried to configure SCR on Windows 2008, but unable
>>>>> to seed...
>>>>>
>>>>> I have looked at the following article :
>>>>> http://technet.microsoft.com/en-us/library/bb691338(EXCHG.80).aspx
>>>>> and http://technet.microsoft.com/en-us/library/bb331973(EXCHG.80).aspx
>>>>>
>>>>> But have tried several different configs, same problem, getting error
>>>>> :
>>>>> Getting the following error :
>>>>> WARNING: Replication for storage group 'EXCH-CCR-MB\SG-Test' is still
>>>>> suspended. If needed, you can use the Resume-StorageGroupCopy cmdlet
>>>>> in the
>>>>> Exchange Management Shell to resume replication.
>>>>>
>>>>> Update-StorageGroupCopy : Seeding failed : Database seeding error:
>>>>> Error
>>>>> return
>>>>> ed from an ESE function call (0xc7ff1004), error code (0x0).
>>>>> At line:1 char:24
>>>>> + Update-StorageGroupCopy <<<< -Identity
>>>>> EXCH-CCR-MB\SG-Test -StandbyMachi
>>>>> ne EXCH-SCR-TARGET
>>>>>
>>>>> Thanks for any help !!!
>>>>> --
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>>
>
date: Mon, 21 Apr 2008 17:15:33 -0400
author: Thinkpad21
Re: Windows 2008 Firewall configuration for SCR
Ok, with the Windows Firewall service disabled on all 3 servers ( 2 CCR
nodes & SCR Server ), I was able to seed...
That confirms the firewall issue, but just can't figure out exactly what I
need to do... I have tried as suggested with Scott, but must have messed
up...
Would appreciate a step by step document from MS or someone here or a screen
shot of the rules...
Thanks very much !!!
--
"Bharat Suneja [MSFT]" wrote in message
news:%234DxlV%23oIHA.3556@TK2MSFTNGP04.phx.gbl...
> Have you disabled Windows Firewall on SCR source & target servers?
>
> --
> Bharat Suneja
> Microsoft Corporation
> ------------------------
> This posting is provided "AS IS" with no warranties, and confers no
> rights. Please do not send email directly to this alias. This alias is for
> newsgroup purposes only.
>
>
> "Thinkpad21" wrote in message
> news:eSJ8uFpoIHA.4492@TK2MSFTNGP02.phx.gbl...
>>I disabled the interface everywhere in device manager, so no more
>>conflicts, but still the same seeding problem...
>>
>> --
>> --
>> ---
>> Houman Yahyaei ( PMP, CCNA, MCSE, MCT )
>> IT Training and Consulting
>> www.formationhy.com
>> Houman@formationhy.com
>> "Thinkpad21" wrote in message
>> news:OXH3F3ooIHA.4292@TK2MSFTNGP04.phx.gbl...
>>>I can get to a share on the SCR target from source, since the SCR target
>>>is also the CCR share witness machine... ( in the lab infrastructure, in
>>>prod, it would be a server in another site )....
>>>
>>> The only IP conflict I can see is the IPV6 Teredo Tunneling
>>> Pseudo-Interface...
>>>
>>> I'm in the process of building a similar system in production
>>> environement and have the same problem with the Teredo interface.
>>>
>>> I have changed the regkey :
>>> "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\DisabledCompontents"
>>> to 8, rebooted, but still the same problem...
>>>
>>> Please help...
>>>
>>> Thanks !!!
>>>
>>>
>>> --
>>> =
>>> "Bharat Suneja [MSFT]" wrote in message
>>> news:uq3wFGmoIHA.2208@TK2MSFTNGP04.phx.gbl...
>>>> Can you get to a shared folder on the SCR target computer from the SCR
>>>> source? This is to validate you have SMB connectivity.
>>>>
>>>> The error code 0xc7ff1004 refers to an IP address conflict/duplicate IP
>>>> addresses.
>>>> --
>>>> Bharat Suneja
>>>> Microsoft Corporation
>>>> ------------------------
>>>> This posting is provided "AS IS" with no warranties, and confers no
>>>> rights. Please do not send email directly to this alias. This alias is
>>>> for
>>>> newsgroup purposes only.
>>>>
>>>>
>>>> "Thinkpad21" wrote in message
>>>> news:OrjnCncoIHA.3556@TK2MSFTNGP04.phx.gbl...
>>>>> Hi,
>>>>>
>>>>> I have looked and tried to configure SCR on Windows 2008, but unable
>>>>> to seed...
>>>>>
>>>>> I have looked at the following article :
>>>>> http://technet.microsoft.com/en-us/library/bb691338(EXCHG.80).aspx
>>>>> and http://technet.microsoft.com/en-us/library/bb331973(EXCHG.80).aspx
>>>>>
>>>>> But have tried several different configs, same problem, getting error
>>>>> :
>>>>> Getting the following error :
>>>>> WARNING: Replication for storage group 'EXCH-CCR-MB\SG-Test' is still
>>>>> suspended. If needed, you can use the Resume-StorageGroupCopy cmdlet
>>>>> in the
>>>>> Exchange Management Shell to resume replication.
>>>>>
>>>>> Update-StorageGroupCopy : Seeding failed : Database seeding error:
>>>>> Error
>>>>> return
>>>>> ed from an ESE function call (0xc7ff1004), error code (0x0).
>>>>> At line:1 char:24
>>>>> + Update-StorageGroupCopy <<<< -Identity
>>>>> EXCH-CCR-MB\SG-Test -StandbyMachi
>>>>> ne EXCH-SCR-TARGET
>>>>>
>>>>> Thanks for any help !!!
>>>>> --
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>>
>
date: Mon, 21 Apr 2008 17:44:11 -0400
author: Thinkpad21
|
|
