Re: Problem with QueuePublish method
Chris,
I would recommend that you install the August 2008 CU
(http://support.microsoft.com/kb/956061). There are several fixes around
Actuals not showing up in plans upon publish - one of them may fix your
issue. I would deploy to Dev first to test.
There is also a client-side (956060) and WSS fix (956057) you should
install (after the IU has been installed), along with the MOSS one
(956056) if necessary.
Steve
--
Stephen Sanderlin
Principal Consultant
MSProjectExperts
For Project Server Consulting: http://www.msprojectexperts.com
For Project Server Training: http://www.projectservertraining.com
Read my blog at: http://www.projectserverhelp.com/
Join the community at: http://forums.epmfaq.com
"Chris C" wrote in message
news:34B99E08-3F53-4307-91CD-4CE479F1DFD7@microsoft.com:
> Good Day Stephen,
>
> they are not in the Published version. They show up in the working copy
> (that comes from the DRAFT DB I believe).
>
>
> Chris
>
>
>
> "Stephen Sanderlin" wrote:
>
>
> > If you open the "Published" version of the project after the automated
> > publish, are the updates shown there as well, or are they only shown in
> > the Working copy?
> >
> > --
> >
> > Stephen Sanderlin
> >
> > Principal Consultant
> >
> > MSProjectExperts
> >
> >
> >
> > For Project Server Consulting: http://www.msprojectexperts.com
> >
> > For Project Server Training: http://www.projectservertraining.com
> >
> >
> >
> > Read my blog at: http://www.projectserverhelp.com/
> >
> > Join the community at: http://forums.epmfaq.com
> >
> >
> >
> >
> >
> > "Chris C" wrote in message
> > news:203B1F9B-0F40-42F3-9F11-BDCC84B722F9@microsoft.com:
> >
>
> > > Good Day Stephen,
> > >
> > > 1-There are no errors in the queue (nor in the ULS logs)
> > > 2-No. If I manually publish the project, the approved updates are published
> > > 3-Yes, if I open the project after "automated publish", the updates are shown
> > > in the plan (and we use the Full publish parameter for the method)
> > > 4-infra pdate + august cumul update
> > > 5-Occurs for all projects
> > > 6-You are right.
> > >
> > > Chris
> > >
> > >
> > > "Stephen Sanderlin" wrote:
> > >
> > >
>
> > > > Clarifying Questions:
> > > >
> > > > 1. Are there any queue or ULS errors?
> > > >
> > > > 2. Does the same issue occur when publishing normally?
> > > >
> > > > 3. After a failure, when opening the project using Pro, does the
> > > > approved but not published time still show up?
> > > >
> > > > 4. What patchlevel are you on?
> > > >
> > > > 5. Does this occur for all projects, or only particular projects?
> > > >
> > > > 6. To make sure my understanding is correct, you have PMs
> > > > receiving updates and approving them manually, but you have an automated
> > > > process that publishes all projects each night?
> > > >
> > > >
> > > >
> > > > --
> > > >
> > > > Stephen Sanderlin
> > > >
> > > > Principal Consultant
> > > >
> > > > MSProjectExperts
> > > >
> > > >
> > > >
> > > > For Project Server Consulting: http://www.msprojectexperts.com
> > > >
> > > > For Project Server Training: http://www.projectservertraining.com
> > > >
> > > >
> > > >
> > > > Read my blog at: http://www.projectserverhelp.com/
> > > >
> > > > Join the community at: http://forums.epmfaq.com
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > "Chris C" wrote in message
> > > > news:67CA4316-BA7B-4C07-893B-71281A98894C@microsoft.com:
> > > >
> > >
>
> > > > > Hello everyone.
> > > > >
> > > > > We use QueuePublish method to publish all projects every night, saving our
> > > > > PM some admin time. The approved tasks updates do not get published however.
> > > > > Anyone else experienced this ? Is this the expected behavior ? I was under
> > > > > the impression that unpublished but approved tasks updates would get
> > > > > published at this time using this method.
> > > > >
> > > > > Tx
> > > > >
> > > > > Chris
> > > >
> > >
> > > >
> >
>
> >
date: Thu, 2 Oct 2008 14:55:51 +0000
author: Stephen Sanderlin stephen NS-DOT sanderlin A-NS-T msprojectexperts DOT-NS com
