I read the 6-25 posts and responses.  I am unable to get the default to save 
to single spacing.  Although the steps in the previous posts were a little 
different than what I see, I found the correct places to make the changes.  
It will not save "New documents based on this template".  It always reverts 
back to "Only in this document".  Please advise.  Thanks.

That behavior is by design. Word only transfers style settings to the 
template when you tell it to do so.

-- 
Stefan Blom
Microsoft Word MVP


"Steve T"  wrote in message 
news:EE898888-2381-433E-8784-A995571C9B77@microsoft.com...
>I read the 6-25 posts and responses.  I am unable to get the default to 
>save
> to single spacing.  Although the steps in the previous posts were a little
> different than what I see, I found the correct places to make the changes.
> It will not save "New documents based on this template".  It always 
> reverts
> back to "Only in this document".  Please advise.  Thanks.

Is there no way to set the default for new documents to no spacing?

"Stefan Blom" wrote:

> That behavior is by design. Word only transfers style settings to the 
> template when you tell it to do so.
> 
> -- 
> Stefan Blom
> Microsoft Word MVP
> 
> 
> "Steve T"  wrote in message 
> news:EE898888-2381-433E-8784-A995571C9B77@microsoft.com...
> >I read the 6-25 posts and responses.  I am unable to get the default to 
> >save
> > to single spacing.  Although the steps in the previous posts were a little
> > different than what I see, I found the correct places to make the changes.
> > It will not save "New documents based on this template".  It always 
> > reverts
> > back to "Only in this document".  Please advise.  Thanks. 
> 
> 
>

Open normal.dotm. Set the style at the cursor to the no spacing style (or 
edit the normal style to have no spacing) type a character. Delete it and 
save the template.

-- 
<>>< ><<> ><<> <>>< ><<> <>>< <>><<>
Graham Mayor -  Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org
<>>< ><<> ><<> <>>< ><<> <>>< <>><<>


Steve T wrote:
> Is there no way to set the default for new documents to no spacing?
>
> "Stefan Blom" wrote:
>
>> That behavior is by design. Word only transfers style settings to the
>> template when you tell it to do so.
>>
>> --
>> Stefan Blom
>> Microsoft Word MVP
>>
>>
>> "Steve T"  wrote in message
>> news:EE898888-2381-433E-8784-A995571C9B77@microsoft.com...
>>> I read the 6-25 posts and responses.  I am unable to get the
>>> default to save
>>> to single spacing.  Although the steps in the previous posts were a
>>> little different than what I see, I found the correct places to
>>> make the changes. It will not save "New documents based on this
>>> template".  It always reverts
>>> back to "Only in this document".  Please advise.  Thanks.

I did exactly as advised for both scenarios.  What now happens is when I open 
a new document and start typing and if I hit return, it double spaces.  Any 
return or new line after that is single spaced.  If I type a full sentance 
with no return or new line and let it automatically word wrap, it single 
spaces.  How do I correct this?

"Graham Mayor" wrote:

> Open normal.dotm. Set the style at the cursor to the no spacing style (or 
> edit the normal style to have no spacing) type a character. Delete it and 
> save the template.
> 
> -- 
> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
> Graham Mayor -  Word MVP
> 
> My web site www.gmayor.com
> Word MVP web site http://word.mvps.org
> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
> 
> 
> Steve T wrote:
> > Is there no way to set the default for new documents to no spacing?
> >
> > "Stefan Blom" wrote:
> >
> >> That behavior is by design. Word only transfers style settings to the
> >> template when you tell it to do so.
> >>
> >> --
> >> Stefan Blom
> >> Microsoft Word MVP
> >>
> >>
> >> "Steve T"  wrote in message
> >> news:EE898888-2381-433E-8784-A995571C9B77@microsoft.com...
> >>> I read the 6-25 posts and responses.  I am unable to get the
> >>> default to save
> >>> to single spacing.  Although the steps in the previous posts were a
> >>> little different than what I see, I found the correct places to
> >>> make the changes. It will not save "New documents based on this
> >>> template".  It always reverts
> >>> back to "Only in this document".  Please advise.  Thanks. 
> 
> 
>

What does the style indicator suggest are the styles at the cursor on the 
first line and on the subsequent paragraphs?
How are those styles setup with relation to both the paragraph spacing, line 
spacing and following paragraph?
Change those three parameters to achieve the require results.
-- 
<>>< ><<> ><<> <>>< ><<> <>>< <>><<>
Graham Mayor -  Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org
<>>< ><<> ><<> <>>< ><<> <>>< <>><<>


Steve T wrote:
> I did exactly as advised for both scenarios.  What now happens is
> when I open a new document and start typing and if I hit return, it
> double spaces.  Any return or new line after that is single spaced.
> If I type a full sentence with no return or new line and let it
> automatically word wrap, it single spaces.  How do I correct this?
>
> "Graham Mayor" wrote:
>
>> Open normal.dotm. Set the style at the cursor to the no spacing
>> style (or edit the normal style to have no spacing) type a
>> character. Delete it and save the template.
>>
>> --
>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>> Graham Mayor -  Word MVP
>>
>> My web site www.gmayor.com
>> Word MVP web site http://word.mvps.org
>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>>
>>
>> Steve T wrote:
>>> Is there no way to set the default for new documents to no spacing?
>>>
>>> "Stefan Blom" wrote:
>>>
>>>> That behavior is by design. Word only transfers style settings to
>>>> the template when you tell it to do so.
>>>>
>>>> --
>>>> Stefan Blom
>>>> Microsoft Word MVP
>>>>
>>>>
>>>> "Steve T"  wrote in message
>>>> news:EE898888-2381-433E-8784-A995571C9B77@microsoft.com...
>>>>> I read the 6-25 posts and responses.  I am unable to get the
>>>>> default to save
>>>>> to single spacing.  Although the steps in the previous posts were
>>>>> a little different than what I see, I found the correct places to
>>>>> make the changes. It will not save "New documents based on this
>>>>> template".  It always reverts
>>>>> back to "Only in this document".  Please advise.  Thanks.

Make sure to set Spacing Before/After to zero for the style you are using.

-- 
Stefan Blom
Microsoft Word MVP


"Steve T"  wrote in message 
news:BF533231-882C-492C-B9BA-19CD0123C50A@microsoft.com...
>I did exactly as advised for both scenarios.  What now happens is when I 
>open
> a new document and start typing and if I hit return, it double spaces. 
> Any
> return or new line after that is single spaced.  If I type a full sentance
> with no return or new line and let it automatically word wrap, it single
> spaces.  How do I correct this?
>
> "Graham Mayor" wrote:
>
>> Open normal.dotm. Set the style at the cursor to the no spacing style (or
>> edit the normal style to have no spacing) type a character. Delete it and
>> save the template.
>>
>> -- 
>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>> Graham Mayor -  Word MVP
>>
>> My web site www.gmayor.com
>> Word MVP web site http://word.mvps.org
>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>>
>>
>> Steve T wrote:
>> > Is there no way to set the default for new documents to no spacing?
>> >
>> > "Stefan Blom" wrote:
>> >
>> >> That behavior is by design. Word only transfers style settings to the
>> >> template when you tell it to do so.
>> >>
>> >> --
>> >> Stefan Blom
>> >> Microsoft Word MVP
>> >>
>> >>
>> >> "Steve T"  wrote in message
>> >> news:EE898888-2381-433E-8784-A995571C9B77@microsoft.com...
>> >>> I read the 6-25 posts and responses.  I am unable to get the
>> >>> default to save
>> >>> to single spacing.  Although the steps in the previous posts were a
>> >>> little different than what I see, I found the correct places to
>> >>> make the changes. It will not save "New documents based on this
>> >>> template".  It always reverts
>> >>> back to "Only in this document".  Please advise.  Thanks.
>>
>>
>>

Here is the description of Normal as described in Modify for Normal style:

Font: (Default) +Body, Left, Line spacing:  single, Space After:  10 pt, 
Widow/Orphan control, Style: Quick Style, Following style: No Spacing

I still cannot correct this.  Thanks for the help!!

"Stefan Blom" wrote:

> Make sure to set Spacing Before/After to zero for the style you are using.
> 
> -- 
> Stefan Blom
> Microsoft Word MVP
> 
> 
> "Steve T"  wrote in message 
> news:BF533231-882C-492C-B9BA-19CD0123C50A@microsoft.com...
> >I did exactly as advised for both scenarios.  What now happens is when I 
> >open
> > a new document and start typing and if I hit return, it double spaces. 
> > Any
> > return or new line after that is single spaced.  If I type a full sentance
> > with no return or new line and let it automatically word wrap, it single
> > spaces.  How do I correct this?
> >
> > "Graham Mayor" wrote:
> >
> >> Open normal.dotm. Set the style at the cursor to the no spacing style (or
> >> edit the normal style to have no spacing) type a character. Delete it and
> >> save the template.
> >>
> >> -- 
> >> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
> >> Graham Mayor -  Word MVP
> >>
> >> My web site www.gmayor.com
> >> Word MVP web site http://word.mvps.org
> >> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
> >>
> >>
> >> Steve T wrote:
> >> > Is there no way to set the default for new documents to no spacing?
> >> >
> >> > "Stefan Blom" wrote:
> >> >
> >> >> That behavior is by design. Word only transfers style settings to the
> >> >> template when you tell it to do so.
> >> >>
> >> >> --
> >> >> Stefan Blom
> >> >> Microsoft Word MVP
> >> >>
> >> >>
> >> >> "Steve T"  wrote in message
> >> >> news:EE898888-2381-433E-8784-A995571C9B77@microsoft.com...
> >> >>> I read the 6-25 posts and responses.  I am unable to get the
> >> >>> default to save
> >> >>> to single spacing.  Although the steps in the previous posts were a
> >> >>> little different than what I see, I found the correct places to
> >> >>> make the changes. It will not save "New documents based on this
> >> >>> template".  It always reverts
> >> >>> back to "Only in this document".  Please advise.  Thanks.
> >>
> >>
> >> 
> 
> 
>

No need to reply.  I got it.  Just being stupid.  The before and after did 
it.  Thanks.

"Steve T" wrote:

> Here is the description of Normal as described in Modify for Normal style:
> 
> Font: (Default) +Body, Left, Line spacing:  single, Space After:  10 pt, 
> Widow/Orphan control, Style: Quick Style, Following style: No Spacing
> 
> I still cannot correct this.  Thanks for the help!!
> 
> "Stefan Blom" wrote:
> 
> > Make sure to set Spacing Before/After to zero for the style you are using.
> > 
> > -- 
> > Stefan Blom
> > Microsoft Word MVP
> > 
> > 
> > "Steve T"  wrote in message 
> > news:BF533231-882C-492C-B9BA-19CD0123C50A@microsoft.com...
> > >I did exactly as advised for both scenarios.  What now happens is when I 
> > >open
> > > a new document and start typing and if I hit return, it double spaces. 
> > > Any
> > > return or new line after that is single spaced.  If I type a full sentance
> > > with no return or new line and let it automatically word wrap, it single
> > > spaces.  How do I correct this?
> > >
> > > "Graham Mayor" wrote:
> > >
> > >> Open normal.dotm. Set the style at the cursor to the no spacing style (or
> > >> edit the normal style to have no spacing) type a character. Delete it and
> > >> save the template.
> > >>
> > >> -- 
> > >> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
> > >> Graham Mayor -  Word MVP
> > >>
> > >> My web site www.gmayor.com
> > >> Word MVP web site http://word.mvps.org
> > >> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
> > >>
> > >>
> > >> Steve T wrote:
> > >> > Is there no way to set the default for new documents to no spacing?
> > >> >
> > >> > "Stefan Blom" wrote:
> > >> >
> > >> >> That behavior is by design. Word only transfers style settings to the
> > >> >> template when you tell it to do so.
> > >> >>
> > >> >> --
> > >> >> Stefan Blom
> > >> >> Microsoft Word MVP
> > >> >>
> > >> >>
> > >> >> "Steve T"  wrote in message
> > >> >> news:EE898888-2381-433E-8784-A995571C9B77@microsoft.com...
> > >> >>> I read the 6-25 posts and responses.  I am unable to get the
> > >> >>> default to save
> > >> >>> to single spacing.  Although the steps in the previous posts were a
> > >> >>> little different than what I see, I found the correct places to
> > >> >>> make the changes. It will not save "New documents based on this
> > >> >>> template".  It always reverts
> > >> >>> back to "Only in this document".  Please advise.  Thanks.
> > >>
> > >>
> > >> 
> > 
> > 
> >

I'm glad you got it sorted.

-- 
Stefan Blom
Microsoft Word MVP


"Steve T"  wrote in message 
news:AFF32715-E71E-4202-A1E5-52C81DAD4A2F@microsoft.com...
> No need to reply.  I got it.  Just being stupid.  The before and after did
> it.  Thanks.
>
> "Steve T" wrote:
>
>> Here is the description of Normal as described in Modify for Normal 
>> style:
>>
>> Font: (Default) +Body, Left, Line spacing:  single, Space After:  10 pt,
>> Widow/Orphan control, Style: Quick Style, Following style: No Spacing
>>
>> I still cannot correct this.  Thanks for the help!!
>>
>> "Stefan Blom" wrote:
>>
>> > Make sure to set Spacing Before/After to zero for the style you are 
>> > using.
>> >
>> > -- 
>> > Stefan Blom
>> > Microsoft Word MVP
>> >
>> >
>> > "Steve T"  wrote in message
>> > news:BF533231-882C-492C-B9BA-19CD0123C50A@microsoft.com...
>> > >I did exactly as advised for both scenarios.  What now happens is when 
>> > >I
>> > >open
>> > > a new document and start typing and if I hit return, it double 
>> > > spaces.
>> > > Any
>> > > return or new line after that is single spaced.  If I type a full 
>> > > sentance
>> > > with no return or new line and let it automatically word wrap, it 
>> > > single
>> > > spaces.  How do I correct this?
>> > >
>> > > "Graham Mayor" wrote:
>> > >
>> > >> Open normal.dotm. Set the style at the cursor to the no spacing 
>> > >> style (or
>> > >> edit the normal style to have no spacing) type a character. Delete 
>> > >> it and
>> > >> save the template.
>> > >>
>> > >> -- 
>> > >> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>> > >> Graham Mayor -  Word MVP
>> > >>
>> > >> My web site www.gmayor.com
>> > >> Word MVP web site http://word.mvps.org
>> > >> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>> > >>
>> > >>
>> > >> Steve T wrote:
>> > >> > Is there no way to set the default for new documents to no 
>> > >> > spacing?
>> > >> >
>> > >> > "Stefan Blom" wrote:
>> > >> >
>> > >> >> That behavior is by design. Word only transfers style settings to 
>> > >> >> the
>> > >> >> template when you tell it to do so.
>> > >> >>
>> > >> >> --
>> > >> >> Stefan Blom
>> > >> >> Microsoft Word MVP
>> > >> >>
>> > >> >>
>> > >> >> "Steve T"  wrote in message
>> > >> >> news:EE898888-2381-433E-8784-A995571C9B77@microsoft.com...
>> > >> >>> I read the 6-25 posts and responses.  I am unable to get the
>> > >> >>> default to save
>> > >> >>> to single spacing.  Although the steps in the previous posts 
>> > >> >>> were a
>> > >> >>> little different than what I see, I found the correct places to
>> > >> >>> make the changes. It will not save "New documents based on this
>> > >> >>> template".  It always reverts
>> > >> >>> back to "Only in this document".  Please advise.  Thanks.
>> > >>
>> > >>
>> > >>
>> >
>> >
>> >

this works too:
open a new doc, click page layout tab, set the 'after' spacing from 10 to 0, 
then directly under that where it says 'paragraph' there is a little button 
to the right that opens the paragraph dialog box. when that opens there is a 
'Default...' button. click that and it asks if you want to save these 
settings as the default for 'Normal' layout. click yes.  close word and go 
back in, it will always default to single spaced.


"Stefan Blom" wrote:

> I'm glad you got it sorted.
> 
> -- 
> Stefan Blom
> Microsoft Word MVP
> 
> 
> "Steve T"  wrote in message 
> news:AFF32715-E71E-4202-A1E5-52C81DAD4A2F@microsoft.com...
> > No need to reply.  I got it.  Just being stupid.  The before and after did
> > it.  Thanks.
> >
> > "Steve T" wrote:
> >
> >> Here is the description of Normal as described in Modify for Normal 
> >> style:
> >>
> >> Font: (Default) +Body, Left, Line spacing:  single, Space After:  10 pt,
> >> Widow/Orphan control, Style: Quick Style, Following style: No Spacing
> >>
> >> I still cannot correct this.  Thanks for the help!!
> >>
> >> "Stefan Blom" wrote:
> >>
> >> > Make sure to set Spacing Before/After to zero for the style you are 
> >> > using.
> >> >
> >> > -- 
> >> > Stefan Blom
> >> > Microsoft Word MVP
> >> >
> >> >
> >> > "Steve T"  wrote in message
> >> > news:BF533231-882C-492C-B9BA-19CD0123C50A@microsoft.com...
> >> > >I did exactly as advised for both scenarios.  What now happens is when 
> >> > >I
> >> > >open
> >> > > a new document and start typing and if I hit return, it double 
> >> > > spaces.
> >> > > Any
> >> > > return or new line after that is single spaced.  If I type a full 
> >> > > sentance
> >> > > with no return or new line and let it automatically word wrap, it 
> >> > > single
> >> > > spaces.  How do I correct this?
> >> > >
> >> > > "Graham Mayor" wrote:
> >> > >
> >> > >> Open normal.dotm. Set the style at the cursor to the no spacing 
> >> > >> style (or
> >> > >> edit the normal style to have no spacing) type a character. Delete 
> >> > >> it and
> >> > >> save the template.
> >> > >>
> >> > >> -- 
> >> > >> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
> >> > >> Graham Mayor -  Word MVP
> >> > >>
> >> > >> My web site www.gmayor.com
> >> > >> Word MVP web site http://word.mvps.org
> >> > >> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
> >> > >>
> >> > >>
> >> > >> Steve T wrote:
> >> > >> > Is there no way to set the default for new documents to no 
> >> > >> > spacing?
> >> > >> >
> >> > >> > "Stefan Blom" wrote:
> >> > >> >
> >> > >> >> That behavior is by design. Word only transfers style settings to 
> >> > >> >> the
> >> > >> >> template when you tell it to do so.
> >> > >> >>
> >> > >> >> --
> >> > >> >> Stefan Blom
> >> > >> >> Microsoft Word MVP
> >> > >> >>
> >> > >> >>
> >> > >> >> "Steve T"  wrote in message
> >> > >> >> news:EE898888-2381-433E-8784-A995571C9B77@microsoft.com...
> >> > >> >>> I read the 6-25 posts and responses.  I am unable to get the
> >> > >> >>> default to save
> >> > >> >>> to single spacing.  Although the steps in the previous posts 
> >> > >> >>> were a
> >> > >> >>> little different than what I see, I found the correct places to
> >> > >> >>> make the changes. It will not save "New documents based on this
> >> > >> >>> template".  It always reverts
> >> > >> >>> back to "Only in this document".  Please advise.  Thanks.
> >> > >>
> >> > >>
> >> > >>
> >> >
> >> >
> >> > 
> 
> 
>

Assuming that I remember correctly, updating the template was part of the 
OP's problem, which is why it was suggested that he should open the Normal 
template directly. (The underlying issue in such cases might be a poorly 
designed add-in preventing Word from saving to the Normal template.) Under 
normal circumstances, though, what you are suggesting should be working.

-- 
Stefan Blom
Microsoft Word MVP


"Dave D" <Dave D@discussions.microsoft.com> wrote in message
news:207DF6F8-81FD-4D3D-8015-4E9D128D9E79@microsoft.com...
> this works too:
> open a new doc, click page layout tab, set the 'after' spacing from 10 to
> 0,
> then directly under that where it says 'paragraph' there is a little
> button
> to the right that opens the paragraph dialog box. when that opens there is
> a
> 'Default...' button. click that and it asks if you want to save these
> settings as the default for 'Normal' layout. click yes.  close word and go
> back in, it will always default to single spaced.
>
>
> "Stefan Blom" wrote:
>
>> I'm glad you got it sorted.
>>
>> -- 
>> Stefan Blom
>> Microsoft Word MVP
>>
>>
>> "Steve T"  wrote in message
>> news:AFF32715-E71E-4202-A1E5-52C81DAD4A2F@microsoft.com...
>> > No need to reply.  I got it.  Just being stupid.  The before and after
>> > did
>> > it.  Thanks.
>> >
>> > "Steve T" wrote:
>> >
>> >> Here is the description of Normal as described in Modify for Normal
>> >> style:
>> >>
>> >> Font: (Default) +Body, Left, Line spacing:  single, Space After:  10
>> >> pt,
>> >> Widow/Orphan control, Style: Quick Style, Following style: No Spacing
>> >>
>> >> I still cannot correct this.  Thanks for the help!!
>> >>
>> >> "Stefan Blom" wrote:
>> >>
>> >> > Make sure to set Spacing Before/After to zero for the style you are
>> >> > using.
>> >> >
>> >> > -- 
>> >> > Stefan Blom
>> >> > Microsoft Word MVP
>> >> >
>> >> >
>> >> > "Steve T"  wrote in message
>> >> > news:BF533231-882C-492C-B9BA-19CD0123C50A@microsoft.com...
>> >> > >I did exactly as advised for both scenarios.  What now happens is
>> >> > >when
>> >> > >I
>> >> > >open
>> >> > > a new document and start typing and if I hit return, it double
>> >> > > spaces.
>> >> > > Any
>> >> > > return or new line after that is single spaced.  If I type a full
>> >> > > sentance
>> >> > > with no return or new line and let it automatically word wrap, it
>> >> > > single
>> >> > > spaces.  How do I correct this?
>> >> > >
>> >> > > "Graham Mayor" wrote:
>> >> > >
>> >> > >> Open normal.dotm. Set the style at the cursor to the no spacing
>> >> > >> style (or
>> >> > >> edit the normal style to have no spacing) type a character.
>> >> > >> Delete
>> >> > >> it and
>> >> > >> save the template.
>> >> > >>
>> >> > >> -- 
>> >> > >> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>> >> > >> Graham Mayor -  Word MVP
>> >> > >>
>> >> > >> My web site www.gmayor.com
>> >> > >> Word MVP web site http://word.mvps.org
>> >> > >> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>> >> > >>
>> >> > >>
>> >> > >> Steve T wrote:
>> >> > >> > Is there no way to set the default for new documents to no
>> >> > >> > spacing?
>> >> > >> >
>> >> > >> > "Stefan Blom" wrote:
>> >> > >> >
>> >> > >> >> That behavior is by design. Word only transfers style settings
>> >> > >> >> to
>> >> > >> >> the
>> >> > >> >> template when you tell it to do so.
>> >> > >> >>
>> >> > >> >> --
>> >> > >> >> Stefan Blom
>> >> > >> >> Microsoft Word MVP
>> >> > >> >>
>> >> > >> >>
>> >> > >> >> "Steve T"  wrote in message
>> >> > >> >> news:EE898888-2381-433E-8784-A995571C9B77@microsoft.com...
>> >> > >> >>> I read the 6-25 posts and responses.  I am unable to get the
>> >> > >> >>> default to save
>> >> > >> >>> to single spacing.  Although the steps in the previous posts
>> >> > >> >>> were a
>> >> > >> >>> little different than what I see, I found the correct places
>> >> > >> >>> to
>> >> > >> >>> make the changes. It will not save "New documents based on
>> >> > >> >>> this
>> >> > >> >>> template".  It always reverts
>> >> > >> >>> back to "Only in this document".  Please advise.  Thanks.
>> >> > >>
>> >> > >>
>> >> > >>
>> >> >
>> >> >
>> >> >
>>
>>
>>