Single Disk Image
Mon, 12 Dec 2005 17:27:47 +1300
I am about to create a single disk image with different hardware the HALs
are as follows:
1. ACPI Uniprocessor PC
2. Advanced Configuration and Power Interface (ACPI) PC
3. ACPI Multiprocessor PC
1. Which HAL I should build master image?
2. Do I need to use the UpdateUPHAL parameter in my sysprep.inf? ...
|
HAL
Mon, 12 Dec 2005 09:11:18 +1300
How do i tell which HALS I need to add to my sysprep.inf.
I have checked device manager>Computer and seen that i have a ACPI UP PC
which uses hal.dll.
Do I now need to find teh corresponding inf file? Can I assume that the inf
file is hal.inf?
Do Ireally need to use this field if all of my HALs are AC ...
|
Consolidating Disk Images 09/12/2005
Fri, 9 Dec 2005 13:39:34 +1300
I am in the process of creating a single Windows 2000 disk image for18 PC
types.
From a technet posting this information was provided:
Include multiple HAL types in an image. You can put multiple HAL types in
one image, use a script to help you determine the HAL type of the target
computer, and then ...
|
Upgrade 2000 Forest Root to 2003
Mon, 5 Dec 2005 14:22:02 -0800
I have a windows 2000 forest with 2 locations with 2 separate domains one for
each location. They are connected via a T1 connection. The forest root is
located at this location and I would like to replace this server with a new
2003 server.
I would like to know if I need to run the adprep on both domain ...
|
Break a mirror -W2K
Sun, 4 Dec 2005 22:00:02 -0800
Hi, folks
I am not sure whether I post to the right newsgroup for this question. If
not, please advise me. Thanks.
I have 1 W2K server (SP4) consists of 2 SCSI disks in Win2K software RAID1.
Last week, I got an error message box telling me one part of the disk was
un-accessable. However the system stil ...
|
no matching CD-based image on server
4 Dec 2005 18:05:45 -0800
I have just setup a ris server and created a flat(cd based) image. I
made the cd image from Win2k with sp4 and rollup1v2 slipstreamed into
it, I have also bundled into it the network drivers for an optiplex
170l as w2k didn't pick these up.
I can build clients over the network with this image no problem.
Whe ...
|
Setting partition size with flat CD RIS image
Sat, 3 Dec 2005 15:39:41 +1100
I have been testing building Win2003 servers from a RIS image that is a flat
CD image of Win2003 SP1. We like to set the C: drive of our servers at 20Gb
and format the rest as D:, and the only way I have found of doing this is to
use Repartition=No in ristndrd.sif file and partition the disk manually in
t ...
|
|
|
Alternative network installation?
Fri, 2 Dec 2005 11:16:05 -0800
I'm struggling with the reinstallation of one of my laptops. The laptop (an
older unit) has been running Windows 2000 but is becoming a bit sluggish and
is in need of a reinstall. The trouble is the cd drive on the laptop doesn't
seem to want to work (I get all sorts of read errors regardless of the disc
i ...
|
Display drivers for Windows 2003
Thu, 1 Dec 2005 23:58:02 -0800
Hi,
I'm installing Windows server 2003 on my PC with a Radeon 850 card and need
to install a driver for this. However at the ATI website they don't provide
drivers for win 2003, so should I pick the drivers for xp or win2000?
Thanks in advance! ...
|
RIS Error - TFTP Open Timeout
Tue, 29 Nov 2005 12:32:41 -0000
Hi,
I've had RIS running successfully for the past couple of years, and rarely
have any problems. But today I've received a new laptop, an Acer Aspire
3020. I'm trying to boot off the LAN so I can install XP Pro (rather than
Home edition, cringe!). However when I try and boot, I press F12, the PXE
envir ...
|
