VPN consistantly disconnects after 179 seconds
Tue, 29 Jan 2008 10:20:51 -0800
When a user connects to my VPN (RRAS on server 2003), the connection ends
after 179 seconds. This happens every time. I have tried with clients
running Vista Ultimate, XP, and server 2003. Going through the logs on the
server, I have found a few entries that I am attempting to see what the codes
mean. RA ...
|
Instalacion Chip Consolas Wii Playstation 2 - Xbox360 - Playstation 3 - Ps2 Ps3
Mon, 28 Jan 2008 18:54:09 +0100
...
|
NO PPP ADAPTER
Tue, 22 Jan 2008 18:17:07 -0800
I sam seting up VPN access, but when RRAS serivce starts i loose all
connection to the server, and there is no PPP Adapter if i got to the comand
line and type.. IPCONFIG /all.
And under IP ROUTING/General the INTERNAL interface is NOT AVAILABLE.
I have it setup on another server and works fine, but that s ...
|
Clients can't get out
Tue, 22 Jan 2008 17:57:14 -0800
10.0.0.159--RA--11.11.11.1--11.11.11.2--RB--12.12.12.1--RC--192.168.1.1--Client 192.168.1.254
RA connects to a LAN, RB and RC as shown. Client connects to RC. Client
can PING 10.0.0.159.
RA can surf the net. RA can ping 10.0.0.1 - the gateway.
Client one, and none of the routers can access 10.0.0.1.
I ...
|
Forever
Sun, 20 Jan 2008 12:50:53 -0800
...
|
Multiple NICs
Wed, 16 Jan 2008 13:47:00 -0800
I have a Windows 2000 Server and I installed multiple NIC with different IP
range. I am wonderign how can I force outbound traffic to use any specific
NIC as its source. i will be running differnt apps on this server and each
will connect to different network but the source must be specific because the
fir ...
|
failed to modify routing table after VPN connection is established
thru Routing and RAS
Thu, 3 Jan 2008 12:37:19 -0800 (PST)
I have 2 Win2K boxes, one Win2K enables Routing and RAS service and
acting like VPN server, it accepts VPN incoming connections and has IP
pool from 192.168.11.2 to 192.168.11.10, so the it will have
192.168.11.2 IP when VPN connection is established. Another Win2K acts
like VPN client, it connects to VPN server ...
|
|
|
IPX routing in Windows 2000 Professional
Wed, 26 Dec 2007 01:36:11 -0600
Greetings:
How may I enable or install IPX routing in Win2k Pro? I have a Win98
guest running in a 'virtualbox' vm which has IP and IPX (and a Novell
32-bit client) configured. The host sees two NICs: its ethernet
hardware NIC and the virtualbox 'Host Network Interface (TAP)' virtual
NIC; I have IP routing wo ...
|
Basic Local LAN to LAN routing
Mon, 24 Dec 2007 10:15:52 -0800 (PST)
I have two LANs in the same building I whish to interconnect. Each
needs a DHCP server. One has a gateway to the Internet and the other
does not.
LAN A: 192.168.1.0/24 gateway 192.168.1.20
LAN B: 192.168.11.0/24 no gateway
I have a WS2K3 R2 machine with two NICs. On the 192.168.1.0 LAN, it
has ...
|
Basic All Local LAN to LAN routing...
Mon, 24 Dec 2007 10:03:24 -0800 (PST)
I have two LANs I would like to interconnect. Each needs a DHCP. One
of these LANs has a gateway to the Internet.
LAN A: 192.168.1.0/24 gateway of 192.168.1.20
LAN B: ...
|
